Skip to content
A8143Assembly2021-2022 Session

Raise Building Efficiency Standards

Official title

“Relates to establishing the "Advanced Building Codes, Appliance and Equipment Efficiency Standards Act of 2022"”

Sponsor Patricia FahyAD-109+41 co-sponsorsAffects Environment & Energy
Status
In Senate Committee
Energy And Telecommunications
Impact
8/10
Significant
Passage
0%

Bill progress

Step 5 of 7

In Senate · Energy And Telecommunications

What's happening

This bill updates New York's energy laws to establish stronger building codes and efficiency standards for appliances and equipment to reduce greenhouse gas emissions and promote clean energy.

Why it matters

  1. Statewide renovation reach. Would remove specific statutory exceptions for work such as window, roofing and lighting replacements, leaving exceptions to the code council. Unaltered portions of existing buildings would remain outside the compliance requirement.

  2. Longer cost horizon. Would replace the code’s ten-year energy-savings test with a building-design-life analysis that also considers societal effects such as emissions reductions. Historic buildings would lose their blanket exemption, with exemptions instead tied to threats to historic form, fabric or function.

  3. Broader product oversight. Would extend appliance restrictions across New York to leases, rentals and offers to install covered new products, subject to specified exceptions and federal preemption. NYSERDA would lead standard-setting, while the Department of State would gain subpoena authority for investigations and hearings.

The daily · weekday mornings

Albany, before your first meeting.

Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.

Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.

Who cares

  • Building owners and renovation contractors

    Removing statutory exceptions for specific alterations would change which projects may need to meet the energy code.

  • Historic property owners and preservation officials

    Exemption requests would require consultation with state preservation officials and, for locally designated or certified buildings, the locality.

  • Appliance manufacturers, retailers and rental businesses

    Expanded product coverage would bring additional equipment and transactions under efficiency, testing and potential certification requirements.

  • Residents of disadvantaged communities

    NYSERDA would have to provide public-comment opportunities before specified rulemakings and ensure appliance regulations do not disproportionately burden these communities.

Headline styles

Raise Building Efficiency Standards

Plain English, a few words. Used as the page title.

Sponsors

History

  1. Referred to energy and telecommunications
  2. Delivered to senate
  3. Passed assembly
  4. Ordered to third reading rules cal.87
  5. Rules report cal.87
  6. Reported
  7. Reported referred to rules
  8. Reported referred to ways and means
  9. Reported referred to codes
  10. Print number 8143a
  11. Amend (t) and recommit to energy
  12. Referred to energy
Show 1 earlier action
  1. Referred to energy

Full text

23 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗

STATE OF NEW YORK

8143--A

2021-2022 Regular Sessions

IN ASSEMBLY

June 16, 2021

Introduced by M. of A. FAHY, CUSICK, McDONALD, L. ROSENTHAL, BURKE, STECK, SEAWRIGHT, SIMON, JACOBSON, DAVILA, GALEF, KELLES, THIELE, FORREST, GONZALEZ-ROJAS, CARROLL, HEVESI, PAULIN, ENGLEBRIGHT, GALLAGHER, STERN, SILLITTI, LUNSFORD, MEEKS, BURDICK, ABINANTI, OTIS, STIRPE, MITAYNES, DILAN -- read once and referred to the Committee on Energy -- recommitted to the Committee on Energy in accordance with Assembly Rule 3, sec. 2 -- committee discharged, bill amended, ordered reprinted as amended and recommitted to said committee

AN ACT to amend the energy law, the executive law and the state finance law, in relation to establishing the "advanced building codes, appliance and equipment efficiency standards act of 2022"

The People of the State of New York, represented in Senate and Assembly, do enact as follows:

Section 1. This act shall be known and may be cited as the "advanced building codes, appliance and equipment efficiency standards act of 2022".

§ 2. Subdivision 2 of section 3-101 of the energy law, as amended by chapter 253 of the laws of 2013, is amended to read as follows:

2. to encourage conservation of energy and to promote the clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, in the construction and operation of new commercial, industrial, agricultural and residential buildings, and in the rehabilitation of existing structures, through heating, cooling, ventilation, lighting, insulation and design techniques and the use of energy audits and life-cycle costing analysis;

§ 3. Subdivisions 3 and 9 of section 11-102 of the energy law, as added by chapter 560 of the laws of 2010, are amended, subdivisions 11, 12, 13, 14, and 15 are renumbered to be subdivisions 12, 13, 14, 15, and 16, and a new subdivision 11 is added to read as follows:

EXPLANATION--Matter in italics (underscored) is new; matter in brackets

[ ] is old law to be omitted.

A LBD12007-07-2

3. ["ASHRAE 90.1-2007." ANSI/ASHRAE/IESNA] "ASHRAE 90.1." ANSI/ASHRAE/IES Standard [90.1-2007] 90.1, entitled "Energy [Standards] Standard for Buildings Except Low-Rise Residential Buildings," published by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.

9. "Historic building." Any building that is one or more of the following: (a) listed, or certified as eligible for listing, on the national register of historic places or on the state register of historic places, (b) [determined by the commissioner of parks, recreation and historic preservation to be eligible for listing on the state register of historic places] designated as historic under an applicable state or local law, or (c) [determined by the commissioner of parks, recreation and historic preservation to be a contributing building to an historic district that is listed or eligible for listing on the state or national registers of historic places, or (d) otherwise defined as an historic building in regulations adopted by the state fire prevention and building code council] certified as a contributing resource within a national register-listed, state register-listed, or locally designated historic district.

11. "Life-cycle cost." An estimate of the total cost of acquisition, operation, maintenance, and construction of any energy system within or related to a building over the design life of the building. "Life-cycle cost" includes, but is not limited to, the cost of fuel, materials, machinery, ancillary devices, labor, service, replacement, and repairs.

§ 4. Paragraph (b) of subdivision 1 and subdivisions 2 and 3 of section 11-103 of the energy law, paragraph (b) of subdivision 1 as added and subdivision 2 as amended by chapter 560 of the laws of 2010 and subdivision 3 as amended by chapter 292 of the laws of 1998, are amended to read as follows:

(b) The code shall apply to the construction of any new building. The code shall also apply to an addition to, and alteration of, any existing building or building system; provided, however, that the code shall not be interpreted to require any unaltered portion of the existing building or building system to comply with the code. The code shall [not apply to the following provided that the energy use of the building is not increased:

(1) storm windows installed over existing fenestration;

(2) glass only replacements in an existing sash and frame;

(3) existing ceiling, wall or floor cavities exposed during construction provided that these cavities are filled with insulation;

(4) construction where the existing roof, wall or floor cavity is not exposed;

(5) reroofing for roofs where neither the sheathing nor the insulation is exposed; roofs without insulation in the cavity and where the sheathing or insulation is exposed during reroofing shall be insulated either above or below the sheathing;

(6) replacement of existing doors that separate conditioned space from the exterior shall not require the installation of a vestibule or revolving door, provided, however, that an existing vestibule that separates such conditioned space from the exterior shall not be removed;

(7) alterations that replace less than fifty percent of the luminaires in a space, provided that such alterations do not increase the installed interior lighting power;

(8) alterations that replace only the bulb and ballast within the existing luminaires in a space provided that the alteration does not increase the installed interior lighting power; and

(9) any other exception] be subject to such other exceptions as may be adopted by the state fire prevention and building code council provided that such [exception will] exceptions shall not prevent the attainment of the compliance goals set forth in section 410(2)(c) of the American Recovery and Reinvestment Act of 2009.

2. (a) The state fire prevention and building code council is authorized, from time to time as it deems appropriate and consistent with the purposes of this article, to review and amend the code, or adopt a new code, through rules and regulations provided that the code remains cost effective with respect to building construction in the state. In determining whether the code remains cost effective, the code council shall consider [whether the cost of materials and their installation to meet its standards would be equal to or less than the present value of energy savings that could be expected over a ten year period in the building in which such materials are installed] (i) whether the life-cycle costs for a building will be recovered through savings in energy costs over the design life of the building under a life-cycle cost analysis performed under methodology as established by the New York state energy research and development authority in regulations which may be updated from time to time, and (ii) secondary or societal effects, such as reductions in greenhouse gas emissions, as defined in regulations. Before publication of a notice of proposed rule making establishing the methodology or defining secondary or societal effects, the president of the authority shall conduct public meetings to provide meaningful opportunities for public comment from all segments of the population that would be impacted by the regulations, including persons living in disadvantaged communities as identified by the climate justice working group established under section 75-0111 of the environmental conservation law. For residential buildings, the code shall meet or exceed the then most recently published International Energy Conservation Code, or achieve equivalent or greater energy savings; and for commercial buildings, the code shall meet or exceed the then most recently published ASHRAE [90.1-2007] 90.1, or achieve equivalent or greater energy savings.

(b) When adopting the first amended version of the code next following the effective date of the chapter of the laws of two thousand twenty-two that added this paragraph and any subsequent codes, the state fire prevention and building code council shall use its best efforts to adopt provisions for residential buildings that achieve energy savings greater than energy savings achieved by the then most recently published International Energy Conservation Code and to adopt provisions for commercial buildings that achieve energy savings greater than energy savings achieved by the then most recently published ASHRAE 90.1, both at levels recommended by the New York state energy research and development authority, provided that the state fire prevention and building code council determines that such advanced energy savings can be achieved while still meeting the cost effectiveness considerations contemplated by this subdivision.

3. Notwithstanding any other provision of law, the state fire prevention and building code council in accordance with the mandate under this article shall have exclusive authority among state agencies to promulgate a construction code incorporating energy conservation features and clean energy features applicable to the construction of any building, including but not limited to greenhouse gas reduction. Any other code, rule or regulation heretofore promulgated or enacted by any other state agency, incorporating specific energy conservation and clean energy requirements applicable to the construction of any building, shall be superseded by the code promulgated pursuant to this section. Notwithstanding the foregoing, nothing in this section shall be deemed to expand the powers of the council to include matters that are exclusively within the statutory jurisdiction of the public service commission, the department of environmental conservation, the office of renewable energy siting or another state entity.

§ 5. Subdivision 5 of section 11-104 of the energy law, as amended by chapter 560 of the laws of 2010, is amended and a new subdivision 6 is added to read as follows:

5. The [code shall exempt from such uniform standards and requirements any historic building as defined in section 11-102 of this article] state fire prevention and building code council shall provide exemptions to such uniform standards and requirements for historic buildings as defined in section 11-102 of this article, to the extent that the uniform standards and requirements would threaten, degrade, or destroy the historic form, fabric, or function of such historic buildings. Any determination on a request for an exemption pursuant to this subdivision shall be made only after consultation with the state commissioner of parks, recreation and historic preservation pursuant to section 14.09 of the parks, recreation and historic preservation law. If the exemption is requested for a locally designated or certified historic building, the locality shall also be consulted.

6. To the fullest extent feasible, the standards for construction of buildings in the code shall be designed to help achieve the state's clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, and as further identified by the New York state climate action council established pursuant to section 75-0103 of the environmental conservation law.

§ 6. The article heading of article 16 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:

APPLIANCE AND EQUIPMENT [ENERGY] EFFICIENCY STANDARDS

§ 6-a. Section 16-102 of the energy law is amended by adding a new subdivision 1-a to read as follows:

1-a. "Product" means any appliance or equipment, other than a motor vehicle, which in operation consumes or is designed to consume energy or to result in the consumption of energy, including any water-related appliance, equipment or fixture that is designed to consume or result in the consumption of energy in its operation or use.

§ 7. Subdivision 4-a of section 16-102 of the energy law, as added by chapter 222 of the laws of 2010, is amended to read as follows:

4-a. ["Bottle-type water dispenser" means a water dispenser that uses a bottle or reservoir as the source of potable water.] The following definitions refer to water coolers:

(a) "Bottle-type" means a water dispenser that uses a bottle or reservoir as the source of potable water.

(b) "Water cooler" means a freestanding device that consumes energy to cool and/or heat potable water.

(c) "Cold only units" means units that dispense cold water only.

(d) "Hot and cold units" means units that dispense both hot and cold water. Some units may also offer room-temperature water.

(e) "Cook and cold units" means units that dispense both cold and room-temperature water.

(f) "Point of use (POU)" means the water cooler is connected to a pressurized water source.

(g) "Conversion-type" means a unit that ships as either bottle-type or POU and includes a conversion kit intended to convert the water cooler from a bottle-type unit to a POU unit or to convert a POU unit to a bottle-type unit.

(h) "Storage-type" means thermally conditioned water is stored in a tank in the water cooler and is available instantaneously.

(i) "On demand" means the water cooler heats water as it is requested, which typically takes a few minutes to deliver.

§ 8. Subdivision 11 of section 16-102 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:

Reflowed for reading: line numbers and page breaks removed. Cite the official text.

Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.