What's happening
This bill updates New York's electronic waste recycling law to require more convenient collection sites, enhanced public education, and full manufacturer funding of recycling costs.
Why it matters
Stronger Convenience Standards. By mandating that at least 90% of New York residents have permanent electronic waste collection sites within 15 miles of their homes, the bill aims to drastically reduce barriers to recycling, especially in rural and suburban areas.
Clearer Manufacturer Accountability. The bill ensures manufacturers are fully responsible for all costs—including collection, transportation, and recycling—regardless of whether they meet annual collection targets, and prohibits shifting costs to local governments or consumers (except certain businesses and premium services).
Enhanced Public Education and Transparency. New requirements mean manufacturers must collaborate with collection sites on outreach, provide post-purchase electronic notifications, and make website/telephone resources available. This is meant to increase public awareness and participation in recycling programs.
Oversight and Enforcement Mechanisms. Operators of collection or recycling sites can now formally request state investigation if a manufacturer is suspected of not covering required costs, with the state empowered to order payment, adding a new layer of accountability and recourse for local partners.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Who cares
Electronics manufacturers
They would face geographic collection-site requirements and have to cover collection, transportation and recycling costs even after meeting annual acceptance standards.
Counties and municipal solid waste authorities
They could establish permanent collection sites and require manufacturers to accept collected equipment at no cost and reimburse reasonable shipment-preparation costs.
Electronic waste collectors and recyclers
They could ask the Department of Environmental Conservation to investigate unpaid costs, with the department required to order payment if it finds a manufacturer failed to cover them.
New York residents
Manufacturers would have to provide collection sites within 15 miles of at least 90 percent of residents and arrange at least three annual collection events in counties with fewer than 65,000 people.
Headline styles
Make Electronics Recycling Easier
Plain English, a few words. Used as the page title.
Sponsors
No co-sponsors yet.
History
- Referred to environmental conservation
- Referred to environmental conservation
Companion bill
The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.
Expand Electronics Recycling Access
In Assembly Committee · Environmental Conservation · Sponsor Pamela J. Hunter
Full text
4 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
1095
2021-2022 Regular Sessions
IN SENATE
January 6, 2021
Introduced by Sen. KAMINSKY -- read twice and ordered printed, and when printed to be committed to the Committee on Environmental Conservation
AN ACT to amend the environmental conservation law, in relation to recycling of electronic products
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. Paragraph (d) of subdivision 1 of section 27-2605 of the environmental conservation law, as added by chapter 99 of the laws of 2010, is amended to read as follows:
(d) a general description of the manner in which the manufacturer will comply with section 27-2603 of this title, including specific information on the manufacturer's electronic waste acceptance program in the state, [and] a current list of locations within the state where consumers may return electronic waste, and a description of the public education and outreach program required by paragraph (c) of subdivision five of this section;
§ 2. Paragraphs (a) and (c) of subdivision 5 of section 27-2605 of the environmental conservation law, as added by chapter 99 of the laws of 2010, are amended to read as follows:
(a) collection, handling and recycling or reuse of electronic waste pursuant to section 27-2603 of this title in a manner convenient to consumers. [The following acceptance methods shall be considered reasonably convenient: (i) mail or ship back return programs; (ii) collection or acceptance events conducted by the manufacturer or the manufacturer's agent or designee, including events conducted through local governments or private parties; (iii) fixed acceptance locations such as dedicated acceptance sites operated by the manufacturer or its agent or designee; (iv) agreements with local governments, retail stores, sales outlets and not-for-profit organizations which have agreed to provide facilities for the collection of electronic waste; (v) community collection events; and (vi) any combination of these or other acceptance methods which effec-
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD01223-01-1
S. 1095 2
tively provide for the acceptance of electronic waste for recycling or reuse through means that are available and reasonably convenient to consumers in the state. At a minimum, the manufacturer shall ensure that all counties of the state, and all municipalities which have a population of ten thousand or greater, have at least one method of acceptance that is available within such county or municipality. The department may establish additional requirements to ensure convenient collection from consumers] To meet minimum collection requirements, a manufacturer or the manufacturer's agent or designee shall use geographic modeling to determine the number and distribution of permanent sites to be operated by the manufacturer or its agent or designee for collection of covered electronic equipment based on the following criteria: (i) at least ninety percent of New York residents shall have a collection site within a fifteen mile radius of their principal residence; and (ii) one additional permanent collection site will be established for every fifty thousand residents of an urbanized area (as defined by the United States Census Bureau).
In addition, a manufacturer or its agent or its designee, shall ensure that: (i) in counties with populations between sixty-five thousand and three hundred thousand people, there shall be no less than three permanent collection locations for collection of covered electronic equipment; and (ii) in counties with less than sixty-five thousand people, there shall be, at a minimum, three community collection or acceptance events conducted on an annual basis by the manufacturer or the manufacturer's agent or designee, or on behalf of the manufacturer or its agent or designee by a local government or private party. The schedule for such collection events shall be made available to the public and provided to the department on or before the first day of January of each year.
Permanent collection locations may be operated by the manufacturer or its agent or designee, or by local governments, retail stores, sales outlets, and not-for-profit organizations which have agreed with the manufacturer or its agent or designee to provide facilities for the collection of electronic waste.
Nothing in this section shall prohibit a county or solid waste authority, at its discretion, to establish a permanent collection site for electronic waste to meet the convenience standard, and the manufacturer, or its agent or designee, shall accept all covered electronic equipment so collected at no cost to the municipality, and shall reimburse to the municipality the reasonable costs of preparing the collected equipment for shipment.
A manufacturer may participate with other manufacturers in a collective electronic waste acceptance program to achieve the convenience standard established herein;
(c) a public education and outreach program, developed in collaboration with the manufacturer and the operator of each electronic waste collection site where the manufacturer's covered electronic equipment is collected, to inform consumers about the manufacturer's electronic waste acceptance program, including at a minimum one or more of the following: (i) an internet website and a toll-free telephone number provided by the manufacturer and written information included in the product manual for, or at the time of sale of, covered electronic equipment that provides sufficient information to allow a consumer of covered electronic equipment to learn how to return the covered equipment for recycling or reuse, and in the case of manufacturers of computers, hard drives and other covered electronic equipment that have internal memory on which
S. 1095 3
personal or other confidential data can be stored, such website shall provide instructions for how consumers can destroy such data before surrendering the products for recycling or reuse; (ii) advertisements and press releases [if any]; and (iii) post-purchase electronic notification from the manufacturer to consumers; and
§ 3. Subdivision 8 of section 27-2605 of the environmental conservation law, as added by chapter 99 of the laws of 2010, is amended to read as follows:
8. A manufacturer shall be responsible for all costs associated with the implementation of the electronic waste acceptance program, including but not limited to all costs of collection, transportation and recycling of covered electronic equipment. A manufacturer shall continue to cover the full costs of collection, transportation and recycling of covered electronic equipment, and its collection responsibilities under subdivision one of this section shall continue, regardless of whether the acceptance standard in subdivision four of section 27-2603 of this article is achieved for the year. The manufacturer or its agent shall not charge consumers, municipalities or electronic waste collection sites for the collection, handling and recycling and reuse of electronic waste, provided that such prohibition shall not apply to a charge on business consumers or to charges for premium services. This prohibition shall not apply to a manufacturer's contract with a consumer for the collection, handling, recycling or reuse of electronic waste that was entered into prior to the effective date of this section. For purposes of this subdivision, "business consumer" means a for-profit entity which has fifty or more full time employees or a not-for-profit corporation with seventy-five or more full time employees, but not a not-for-profit corporation designated under section 501(c)(3) of the internal revenue code. For purposes of this subdivision, "premium services" means equipment and data security services, refurbishment for reuse by the consumer, and other custom services as may be determined by the department.
§ 4. Section 27-2603 of the environmental conservation law is amended by adding a new subdivision 8 to read as follows:
8. A person operating an electronic waste collection site, an electronic waste consolidation facility or an electronic waste recycling facility and having a reasonable ground to believe that a manufacturer has failed or is failing to cover all costs of collection, transportation or recycling of covered electronic equipment, may request the department to investigate such alleged failure and, upon a finding by the department that the manufacturer has failed or is failing to cover such costs, the department shall order the manufacturer to pay such costs.
§ 5. Paragraphs (f) and (h) of subdivision 1 of section 27-2617 of the environmental conservation law, as added by chapter 99 of the laws of 2010, are amended to read as follows:
(f) the names and locations of electronic waste recycling facilities utilized by the manufacturer and entities to which electronic waste is sent for reuse, whether such facilities or entities are located in the state or outside the state, including details on the methods of recycling or reuse of electronic waste, any disassembly or physical recovery operation used, and the environmental management measures implemented by [such] each recycling facility or entity identified by the manufacturer under this paragraph;
(h) a [brief] description of [its] the public education and outreach program required by paragraph (c) of subdivision five of section 27-2605 of this title, including the number of visits to the internet website
S. 1095 4
and calls to the toll-free telephone number provided by the manufacturer [as required by section 27-2605 of this title], copies of written notices, and number of post-purchase electronic notifications sent to consumers;
§ 6. This act shall take effect on the one hundred eightieth day after it shall have become a law.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the environmental conservation law, in relation to recy- cling of electronic products
Purpose
To require manufacturers to describe the outreach programs they under- take to facilitate the recycling of electronic products.
Summary of provisions
Section 1 amends the environmental conservation law to require that manufacturers describe the public education and outreach steps they have taken regarding electronics recycling.
Section 2 requires manufacturers to include more convenient methods of recycling e-waste based upon the number of people a location serves.
Section 3 clarifies that manufactures are responsible for all costs of implementing electronic waste acceptance programs.
Section 4 permits e-waste collection site operators to report manufac- turers that are not complying with the law and request the DEC to inves- tigate these claims.
Section 5 amends the environmental conservation law to require e-waste recycling facilities to have a list of whether the facilities are located in the state, and provide the department all records of the outreach program materials.
Section 6 is the effective date.
Justification
Electronic waste recycling is a valuable part of environmental steward- ship. Electronic products contain many non-biodegradable substances and other toxic parts. By diverting these products from landfills and reclaiming what can be reclaimed and isolating the toxic elements, enti- ties can limit the exposure to pollutants that result from throwing old cathode ray tube (CRT) televisions and computers into the garbage.
This is why New York implemented the Electronic Equipment Recycling and Reuse Act, which requires electronics manufacturers to recycle e-waste. However, insufficient involvement from the manufactures and lack of fixed collection centers has caused instability in the electronics recy- cling market for counties and local governments. Localities are there- fore absorbing the costs of this program when it is the responsibility of the manufacturers to absorb the end of life cost of e-waste.
This legislation seeks to improve upon the program by addressing the needs of consumers and municipalities. First, the mail-back recycling program has proven to be unrealistic and inconvenient. Consumers are not utilizing it to recycle their large electronic waste -,like televisions. The bill eliminates this option and instead creates a comprehensive system that ensures people have access to convenient drop-off locations or collection events. The legislation also helps stakeholders become more aware of their responsibilities under the recycling law and will also expand awareness. Further, by improving upon the reporting require- ments, manufacturers and recyclers will have the incentive to conduct outreach for the programs and therefore promote lasting cultural know- ledge of e-waste recycling. Lastly, this bill will allow the state to better understand the role out-of-state manufacturers play in the recy- cling process and address those concerns as appropriate.
Legislative history
2020: S8480, Kaminsky. Referred to Rules.
Fiscal implications
None.
Effective date
This act shall take effect on the 180th day after it shall have become a law.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.