What's happening
This bill updates New York's building codes and appliance standards to increase energy efficiency, reduce greenhouse gases, and support the state's clean energy and climate goals.
Why it matters
Broader and More Aggressive Standards. The bill expands the list of appliances and building equipment subject to efficiency requirements, including many new categories (from lighting and air conditioners to irrigation systems and electric vehicle supply equipment). This matters because it will drive innovation and potentially limit the sale of less efficient, higher-emission products in New York, affecting both manufacturers and consumers.
Lifecycle and Societal Cost Considerations. Updates to the building code now require a “life-cycle cost analysis” that factors in total costs, including maintenance, energy, and societal effects like greenhouse gas emissions. This is a shift from just looking at upfront expenses versus short-term energy savings, reflecting a more holistic approach to energy policy that may justify higher initial costs for long-term benefits.
Automatic Adoption of Federal Standards. If federal efficiency standards are rolled back or eliminated, New York will automatically continue enforcing the previous federal standards at the state level. This provision is significant because it “locks in” progress and protects against federal policy reversals, ensuring a consistent regulatory environment for businesses and ongoing environmental benefits.
Stronger Enforcement and Accountability. The bill enhances enforcement tools, including new subpoena powers, civil penalties (up to $10,000 per violation for fraudulent certification), and expanded authority for the state attorney general. This increases the likelihood that manufacturers and sellers will comply, making the standards more meaningful in practice and potentially deterring bad actors.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Headline styles
Update Appliance Energy Standards
Plain English, a few words. Used as the page title.
Sponsors
History
- Referred to corporations, authorities and commissions
- Delivered to assembly
- Passed senateVote 42–20
- Advanced to third reading
- 2nd report cal.
- 1st report cal.127
- Reported and committed to finance
- Reference changed to energy and telecommunications
- Referred to rules
- Returned to senate
- Died in assembly
- Referred to corporations, authorities and commissions
Show 4 earlier actions
- Delivered to assembly
- Passed senateVote 43–20
- Ordered to third reading cal.1605
- Referred to rules
Full text
25 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
7176
2021-2022 Regular Sessions
IN SENATE
June 4, 2021
Introduced by Sen. PARKER -- (at request of the Governor) -- read twice and ordered printed, and when printed to be committed to the Committee on Rules
AN ACT to amend the energy law, the executive law and the state finance law, in relation to establishing the "advanced building codes, appliance and equipment efficiency standards act of 2021"
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. This act shall be known and may be cited as the "advanced building codes, appliance and equipment efficiency standards act of 2021".
§ 2. Subdivision 2 of section 3-101 of the energy law, as amended by chapter 253 of the laws of 2013, is amended to read as follows:
2. to encourage conservation of energy and to promote the clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, in the construction and operation of new commercial, industrial, agricultural and residential buildings, and in the rehabilitation of existing structures, through heating, cooling, ventilation, lighting, insulation and design techniques and the use of energy audits and life-cycle costing analysis;
§ 3. Subdivisions 3 and 9 of section 11-102 of the energy law, as added by chapter 560 of the laws of 2010, are amended, subdivisions 11, 12, 13, 14, and 15 are renumbered to be subdivisions 12, 13, 14, 15, and 16, and a new subdivision 11 is added to read as follows:
3. ["ASHRAE 90.1-2007." ANSI/ASHRAE/IESNA] "ASHRAE 90.1." ANSI/ASHRAE/IES Standard [90.1-2007] 90.1, entitled "Energy [Standards] Standard for Buildings Except Low-Rise Residential Buildings," published by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD12007-04-1
S. 7176 2
9. "Historic building." Any building or structure that is one or more of the following: (a) listed, or certified as eligible for listing, on the national register of historic places or on the state register of historic places, (b) [determined by the commissioner of parks, recreation and historic preservation to be eligible for listing on the state register of historic places] designated as historic under an applicable state or local law, or (c) [determined by the commissioner of parks, recreation and historic preservation to be a contributing building to an historic district that is listed or eligible for listing on the state or national registers of historic places, or (d) otherwise defined as an historic building in regulations adopted by the state fire prevention and building code council] certified as a contributing resource within a national register-listed, state register-listed, or locally designated an historic district.
11. "Life-cycle cost." An estimate of the total cost of acquisition, operation, maintenance, and construction of any energy system within or related to a structure over the design life of the structure. "Life-cycle cost" includes, but is not limited to, the cost of fuel, materials, machinery, ancillary devices, labor, service, replacement, and repairs.
§ 4. Paragraph (b) of subdivision 1 and subdivisions 2 and 3 of section 11-103 of the energy law, paragraph (b) of subdivision 1 as added and subdivision 2 as amended by chapter 560 of the laws of 2010 and subdivision 3 as amended by chapter 292 of the laws of 1998, are amended to read as follows:
(b) The code shall apply to the construction of any new building. The code shall also apply to an addition to, and alteration of, any existing building or building system; provided, however, that the code shall not be interpreted to require any unaltered portion of the existing building or building system to comply with the code. The code shall [not apply to the following provided that the energy use of the building is not increased:
(1) storm windows installed over existing fenestration;
(2) glass only replacements in an existing sash and frame;
(3) existing ceiling, wall or floor cavities exposed during construction provided that these cavities are filled with insulation;
(4) construction where the existing roof, wall or floor cavity is not exposed;
(5) reroofing for roofs where neither the sheathing nor the insulation is exposed; roofs without insulation in the cavity and where the sheathing or insulation is exposed during reroofing shall be insulated either above or below the sheathing;
(6) replacement of existing doors that separate conditioned space from the exterior shall not require the installation of a vestibule or revolving door, provided, however, that an existing vestibule that separates such conditioned space from the exterior shall not be removed;
(7) alterations that replace less than fifty percent of the luminaires in a space, provided that such alterations do not increase the installed interior lighting power;
(8) alterations that replace only the bulb and ballast within the existing luminaires in a space provided that the alteration does not increase the installed interior lighting power; and
(9) any other exception] be subject to such other exceptions as may be adopted by the state fire prevention and building code council provided that such [exception will] exceptions shall not prevent the attainment of the compliance goals set forth in section 410(2)(c) of the American Recovery and Reinvestment Act of 2009.
S. 7176 3
2. (a) The state fire prevention and building code council is authorized, from time to time as it deems appropriate and consistent with the purposes of this article, to review and amend the code, or adopt a new code, through rules and regulations provided that the code remains cost effective with respect to building construction in the state. In determining whether the code remains cost effective, the code council shall consider [whether the cost of materials and their installation to meet its standards would be equal to or less than the present value of energy savings that could be expected over a ten year period in the building in which such materials are installed] (i) whether the life-cycle costs for a building or structure will be recovered through savings in energy costs over the design life of the building or structure under a life-cycle cost analysis performed under methodology as established by the New York state energy research and development authority from time to time, and (ii) secondary or societal effects, such as reductions in greenhouse gas emissions. For residential buildings, the code shall meet or exceed the then most recently published International Energy Conservation Code, or achieve equivalent or greater energy savings; and for commercial buildings, the code shall meet or exceed the then most recently published ASHRAE [90.1-2007] 90.1, or achieve equivalent or greater energy savings.
(b) When adopting the first amended version of the code next following the effective date of the chapter of the laws of two thousand twenty-one that added this paragraph, the state fire prevention and building code council shall use its best efforts to adopt provisions for residential buildings that achieve energy savings greater than energy savings achieved by the then most recently published International Energy Conservation Code and to adopt provisions for commercial buildings that achieve energy savings greater than energy savings achieved by the then most recently published ASHRAE 90.1, both at levels recommended by the New York state energy research and development authority, provided that the state fire prevention and building code council determines that such advanced energy savings can be achieved while still meeting the cost effectiveness considerations contemplated by this subdivision.
3. Notwithstanding any other provision of law, the state fire prevention and building code council in accordance with the mandate under this article shall have exclusive authority among state agencies to promulgate a construction code incorporating energy conservation features and clean energy features, including but not limited to greenhouse gas reduction. Any other code, rule or regulation heretofore promulgated or enacted by any other state agency, incorporating specific energy conservation and clean energy requirements applicable to the construction of any building, shall be superseded by the code promulgated pursuant to this section.
§ 5. Subdivision 5 of section 11-104 of the energy law, as amended by chapter 560 of the laws of 2010, is amended and a new subdivision 6 is added to read as follows:
5. The [code shall exempt from such uniform standards and requirements any historic building as defined in section 11-102 of this article] state fire prevention and building code council is authorized to provide exemptions to such uniform standards and requirements for historic buildings as defined in section 11-102 of this article, to the extent that the uniform standards and requirements would threaten, degrade, or destroy the historic form, fabric, or function of such historic buildings.
S. 7176 4
6. To the fullest extent feasible, the code shall be designed to help achieve the state's clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, and as further identified by the New York state climate action council established pursuant to section 75-0103 of the environmental conservation law.
§ 6. The article heading of article 16 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:
APPLIANCE AND EQUIPMENT [ENERGY] EFFICIENCY STANDARDS
§ 7. Subdivision 4-a of section 16-102 of the energy law, as added by chapter 222 of the laws of 2010, is amended to read as follows:
4-a. ["Bottle-type water dispenser" means a water dispenser that uses a bottle or reservoir as the source of potable water.] The following definitions refer to water coolers:
(a) "Bottle-type" means a water dispenser that uses a bottle or reservoir as the source of potable water.
(b) "Water cooler" means a freestanding device that consumes energy to cool and/or heat potable water.
(c) "Cold only units" means units that dispense cold water only.
(d) "Hot and cold units" means units that dispense both hot and cold water. Some units may also offer room-temperature water.
(e) "Cook and cold units" means units that dispense both cold and room-temperature water.
(f) "Point of use (POU)" means the water cooler is connected to a pressurized water source.
(g) "Conversion-type" means a unit that ships as either bottle-type or POU and includes a conversion kit intended to convert the water cooler from a bottle-type unit to a POU unit or to convert a POU unit to a bottle-type unit.
(h) "Storage-type" means thermally conditioned water is stored in a tank in the water cooler and is available instantaneously.
(i) "On demand" means the water cooler heats water as it is requested, which typically takes a few minutes to deliver.
§ 8. Subdivision 11 of section 16-102 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:
11. "Consumer audio and video product" means a mains-connected product that amplifies audio, offers optical, offers disc player functionality, and/or receives and plays audio and/or video content. Examples of consumer audio and video products include televisions, compact audio products, digital versatile disc players, digital versatile disc recorders, [and] digital television adapters and streaming media players.
§ 9. Subdivision 18 of section 16-102 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:
18. ["Energy efficiency performance standards"] "Efficiency standard" means [performance standards which prescribe a minimum level of energy efficiency determined in accordance with test procedures prescribed by the secretary in consultation with the president] a standard that defines performance metrics and/or defines prescriptive design requirements in order to reduce energy consumption, reduce water consumption, reduce greenhouse gas emissions, and/or increase demand flexibility associated with the regulated product category.
§ 10. Subdivisions 27-a and 27-b of section 16-102 of the energy law, as added by chapter 222 of the laws of 2010, are amended to read as follows:
S. 7176 5
27-a. "Portable electric spa" means a factory-built electric spa or hot tub, [supplied with equipment for heating and circulating water] which may or may not include any combination of integral controls, water heating or water circulating equipment.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the energy law, the executive law and the state finance law, in relation to establishing the "advanced building codes, appliance and equipment efficiency standards act of 2021"
Purpose
To remove current barriers in the Energy Law that could impede the adoption of updates to the State Energy Conservation Construction Code (Energy Code) needed to align the Energy Code with the clean energy and climate policies and goals of the State, as well as increase the state's efficiency standards for appliances.
Summary of provisions
Section 1 of the bill would title this bill as the "Advanced Building Codes, Appliance and Equipment Efficiency Standards Act of 2021."
Read the full memo (1,123 words)
Section 2 of this bill would amend subdivision 2 of section 3-101 of the Energy Law by adding the encouragement of clean energy and implementa- tion of the climate agenda set forth.within the Climate Leadership and Community Protection Act to a statement of the State's energy policy relating to the construction and operation of new buildings and in the rehabilitation of existing structures.
Section 3 of this bill would amend section 11-102 of the Energy Law by revising the definition of "ASHRAE 90.1,", "Historic building" and adds a new definition of "life-cycle cost".
Section 4 of this bill would amend 11-103 of the Energy Law by removing the fixed list of changes to existing buildings that are automatically exempt from the Energy Code, and allows the Code Council to determine which exceptions, if any, should be included in the Energy Code and provides that for the purposes of considering the cost effectiveness of proposed amendments to the Energy Code, a life-cycle cost analysis should be used, and secondary or societal effects, such as reductions in carbon emissions, should be considered.
Section 5 of this bill would amend section 11-104 of the Energy Law by adding a new subdivision 6, which will provide that the Energy Code shall be designed to help achieve the State's clean energy and climate agenda set forth within the Climate Leadership and Community Protection Act. 1
Sections 6 of this bill would amend the article heading of Article 16 of the energy law.
Sections 7 through 13 of this bill would amend section 16-102 of the energy law to modify existing definitions and add new definitions for appliances and products that would be covered by this act.
Section 14 of this bill would amend section 16-104 of the energy law to provide for revisions to the applicability and enforcement of this act.
Section 15 of this bill would add a new section 16-105 to the energy law to authorize adopting certain minimum standards approved for publication by the Office of the United States Secretary of Energy.
Section 16 of this bill would amend section 16-106 to provide express authority to the President of NYSERDA, in consultation with the Secre- tary of State, to establish energy efficiency performance standards and promulgate regulations to achieve them, as well as conduct investi- gations.
Sections 17 and 18 of this bill would amend section 16-107 and 16-108 to provide for investigation and enforcement of violations under this act related to appliance and product standards to provide the Secretary of State with the power and authority to enforce standards and issue fines for violations, or refer investigations to the Attorney General for enforcement.
Section 19 of this bill would amend section 16 by adding a new section 16-109 of the energy law to address potential conflicts of laws.
Section 20 of this bill would amend section 94-a of the executive law to grant the Secretary of State authority to enforce appliance standards.
Section 21 of this bill would amend section 374 of the Executive Law by adding two additional members to the Code Council, including the Presi- dent of NYSERDA and the commissioner of one additional State agency, and by adding the Department of Environmental Conservation and the Office of Parks, Recreation and Historic Preservation to the list of State agen- cies whose commissioners are eligible for appointment to the Code Coun- cil, and provides that a majority, but no fewer than seven, of the members of the Code Council shall constitute a quorum.
Section 22 of this bill would amend section 97-www of the state finance law to provide for administration of certain funds derived from enforce- ment or settlements under this act
Section 23 sets forth the effective date. Existing Law: This bill would amend Articles 3, 11 and 16 of the Energy Law, Article 6 section 97-www of state finance law and Article 6 and 18 of the Executive Law to carry out this act.
Existing law
This bill would amend Articles 3, 11 and 16 of the Energy Law, Article 6 section 97-www of state finance law and Article 6 and 18 of the Execu- tive Law to carry out this act.
Justification
The bill is necessary to implement the Governor's energy efficiency and climate change mitigation goals, to reduce energy consumption by 185 trillion BTUs below forecasted levels by 2025.
Buildings are the single largest user of energy in the State of New York, accounting for almost 60% of all energy consumed by end-use in the State. Building energy codes govern new buildings and modifications to existing buildings, directly impacting a building's energy load and carbon footprint. Increasing the efficiency of buildings will have a significant impact on New York's energy use and have a major impact in achieving our energy and climate goals. Increasing the efficiency of buildings will reduce our power demand and decrease our environmental impact while reducing the cost of operating a building.
Furthermore, product and appliance standards prevent New Yorkers from wasting money in the use of everyday items by setting performance and efficiency standards that reduce energy and water use, paying for them- selves. Adoption of energy efficiency and GHG standards will conserve energy and water, reduce pollution and save money. Analysis shows that energy efficiency product standards have the potential to deliver the reduction of over 36 million metric tons of carbon dioxide equivalent (032e) emissions over the lifetime of measures in place by 2030 - equiv- alent to removing an average of half a million cars from the road each year.
The proposed product and appliance standards will deliver a projected $15 billion of total utility bill savings by 2035 for New York consum- ers, including an estimated $6 billion in total utility bill savings for low- to moderate-income households. This legislation also provides DOS with enforcement authority over any state standards.
Legislative history
New bill
Budget implications
To be determined.
Effective date
This act takes effect immediately, except that sections six through 20 and section 22 would take effect 180 days after enactment.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.