What's happening
This bill requires all semiautomatic pistols sold by dealers in New York after January 1, 2025, to be microstamp-ready, enabling identification of the firearm from spent cartridge cases.
Why it matters
Helps law enforcement trace crime guns. By requiring new semiautomatic pistols to mark spent casings with identifying codes, the bill aims to make it easier for police to link guns used in crimes to their original buyers and sellers, potentially speeding up investigations and increasing accountability.
Targets the gun supply chain, not current owners. The requirements apply only to pistols manufactured or delivered to dealers after January 1, 2025, so current gun owners are not affected, but dealers and manufacturers must adapt, potentially changing which firearms are available in New York.
Introduces new criminal penalties. Dealers or manufacturers who sell or deliver non-compliant pistols can face misdemeanor charges, and anyone defacing the microstamping mechanism faces felony or misdemeanor penalties, depending on circumstances—raising the stakes for tampering or ignoring the law.
Exempts necessary repairs and clarifies liability. The law allows for legitimate repair or replacement of microstamping components (like firing pins), and shields dealers from prosecution if they have manufacturer certification of compliance, balancing traceability goals against practical firearm maintenance and dealer protections.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Who cares
Licensed firearms dealers
The bill would bar transfers to nondealers of semiautomatic pistols manufactured on or after January 1, 2025, unless microstamp-ready, with manufacturer certification providing an affirmative defense.
Firearms manufacturers and wholesale dealers
Deliveries in New York of semiautomatic pistols manufactured after January 1, 2025, would require manufacturer certification that the pistols are microstamp-ready.
New York State Police
The division would set rules for manufacturer certifications and for dealers obtaining exact copies of those certifications.
Semiautomatic pistol owners
Willfully defacing a microstamping component would be a class D felony, with exceptions for modifications to enable microstamping and specified firing-pin replacements.
Headline styles
Require Pistol Microstamping
Plain English, a few words. Used as the page title.
Sponsors
No co-sponsors yet.
History
- Referred to codes
- Referred to rules
Full text
2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
7226
2021-2022 Regular Sessions
IN SENATE
June 7, 2021
Introduced by Sen. HOYLMAN -- read twice and ordered printed, and when printed to be committed to the Committee on Rules
AN ACT to amend the penal law, in relation to requiring semiautomatic pistols manufactured or delivered to any licensed dealer in this state to be capable of microstamping ammunition
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. Section 265.00 of the penal law is amended by adding two new subdivisions 32 and 33 to read as follows:
32. "Microstamp-ready", when used with reference to a semiautomatic pistol, means that such pistol is manufactured to produce a unique alpha-numeric or geometric code on at least one location on each expended cartridge case that identifies the make, model, and serial number of the pistol.
33. "Microstamping component or mechanism", when used with reference to a semiautomatic pistol, means a component or mechanism of such pistol designed and intended to produce a unique alpha-numeric or geometric code on an expended cartridge that identifies the make, model, and serial number of the pistol.
§ 2. Subdivision 6 of section 265.10 of the penal law, as amended by chapter 189 of the laws of 2000, is amended to read as follows:
6. (a) Any person who wilfully defaces any machine-gun, large capacity ammunition feeding device or firearm, including defacing a microstamping component or mechanism of a semiautomatic pistol, is guilty of a class D felony.
(b) Any dealer in firearms licensed under section 400.00 of this chapter who sells, offers for sale, exchanges, gives, transfers or delivers a semiautomatic pistol, knowing that a microstamping component or mechanism of such pistol has been defaced, is guilty of a class A misdemeanor. For purposes of this subdivision, defacing a semiautomatic pistol does not include (1) modifying a semiautomatic pistol to render it
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD02762-07-1
S. 7226 2
microstamp-ready or (2) replacing the firing pin of a semiautomatic pistol that is microstamp-ready when such pin is damaged or in need of replacement for the safe use of such pistol, or replacing such pin for a legitimate sporting purpose.
§ 3. The penal law is amended by adding two new sections 265.38 and 265.39 to read as follows: § 265.38 Microstamping of semiautomatic pistols; penalties.
It shall be unlawful:
1. for any dealer in firearms licensed under section 400.00 of this chapter, to sell, offer for sale, exchange, give, transfer or deliver a semiautomatic pistol manufactured on or after January first, two thousand twenty-five to any person other than a dealer in firearms, unless such pistol is microstamp-ready; or
2. for any manufacturer or wholesale dealer to deliver or cause to be delivered to any person in this state, a semiautomatic pistol manufactured after January first, two thousand twenty-five, unless the manufacturer certifies to such person at the time of such delivery, in accordance with rules and regulations promulgated by the division of state police, that such pistol is microstamp-ready. Such rules and regulations shall include a requirement that, as part of the certification, the manufacturer shall provide the make, model and serial number of the pistol.
A violation of any provision of this section is a class B misdemeanor; provided, however, that a person, including a dealer in firearms, wholesale dealer or a manufacturer, who violates any provision of this section after having previously been convicted of violating any provision of this section is guilty of a class A misdemeanor. § 265.39 Microstamping of semiautomatic pistols; affirmative defense.
In any prosecution under subdivision one of section 265.38 of this article, it is an affirmative defense that the dealer in firearms, at the time of sale, offer for sale, exchange, giving, transfer or delivery of the semiautomatic pistol, was in possession of:
1. a certification from the manufacturer of such pistol delivered pursuant to subdivision two of section 265.38 of this article, that such pistol is microstamp-ready; or
2. an exact copy of such certification obtained by the dealer in firearms from such manufacturer in accordance with applicable rules and regulations promulgated by the division of state police.
The division of state police shall promulgate rules and regulations governing procedures and standards for exact copies of certifications and the obtaining of such copies by a dealer in firearms from a manufacturer for purposes of this section.
§ 4. Subdivision 5 of section 265.15 of the penal law, as amended by chapter 695 of the laws of 1987, is amended to read as follows:
5. The possession by any person of a defaced machine-gun, firearm, rifle or shotgun is presumptive evidence that such person defaced the same; provided, however, that this subdivision shall not apply to possession of a semiautomatic pistol where the defacement alleged consists of defacing a microstamping component or mechanism of such pistol.
§ 5. This act shall take effect January 1, 2025.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the penal law, in relation to requiring semiautomatic pistols manufactured or delivered to any licensed dealer in this state to be capable of microstamping ammunition
Purpose or general idea of bill
Requires all semiautomatic pistols manufactured on or after January 1, 2025 that are sold or delivered in New York to be capable of microstamp- ing expended cartridge cases.
Summary of specific provisions
Section 1 of the bill adds two new subdivisions 32 and 33 to section 265.00 of the Penal Law ("Definitions") to define the terms "microstam- pready" and "microstamping component or mechanism."
Read the full memo (1,133 words)
Section 2 of the bill amends subdivision 6 of section 265.10 of the Penal Law ("Manufacture, transport, disposition and defacement of weap- ons and dangerous instruments and appliances") to clarify that the existing class D felony offense of defacing a firearm includes the defacement of a microstamping component or mechanism of a semiautomatic pistol. This section also creates a new class A misdemeanor offense when a dealer in firearms sells, offers for sale, exchanges, gives, transfers or delivers a semiautomatic pistol knowing that the microstamping compo- nent or mechanism of such pistol has been defaced.
Section 3 of the bill adds two new sections 265.38 ("Microstamping of semiautomatic pistols; penalties") and 265.39 ("Microstamping of semiau- tomatic pistols; affirmative defense") to the Penal Law.
-Section 265.38 would prohibit (1) the sale, offer for sale, exchange, giving, transfer or delivery of a semiautomatic pistol manufactured after January 1, 2025, by a dealer in firearms to any person other than a dealer in firearms, unless such pistol is microstamp-ready and (2) any manufacturer or wholesale dealer from delivering a semiautomatic pistol manufactured after January 1, 2023 to any person in this state, unless the pistol is certified by the manufacturer as microstamp-ready in accordance with rules and regulations promulgated by the Division of State Police. A violation of Section 265.38 is a class B misdemeanor; a second or subsequent violation of any of these provisions is a class A misdemeanor.
-Section 265.39 provides dealers in firearms charged under subdivision 2 of section 265.38 with an affirmative defense. The affirmative defense is available to those dealers who, at the time of the sale, offer for sale, exchange, giving, transfer or delivery of a semi-automatic pistol manufactured after January 1, 2025, are in possession of the manufactur- er's certification that such pistol is microstamp-ready, or an exact copy of such certification.
Section 4 of the bill amends subdivision 5 of section 265.15 of the Penal Law ("Presumptions of possession, unlawful intent and defacement") to make the presumption that applies to possession of defaced guns inap-
plicable to semi-automatic pistols where the sole defacement consists of defacing a microstamping component or mechanism of such pistol.
Section 5 of the bill contains the effective date.
Justification
Recent research indicates that across the nation, large numbers of shootings are never reported to law enforcement, and large numbers of fatal and nonfatal shootings go unsolved and undeterred. An in-depth investigation by The Washington Post found that across 52 of the nation's largest cities, 53 percent of murders of African Americans never led to an arrest, let alone a conviction. Other investigative reports have indicated that homicides and attempted homicides involving firearms may be even less likely to lead to an arrest. Research reported by The Trace found that across 22 cities, 65 percent of fatal shootings involving an African American or Hispanic victim never led to an arrest. When shootings, homicides, and other firearm crimes are unsolved and undeterred, retaliatory cycles of violence, trauma, and vigilantism are more likely to erupt instead, leading to increased interpersonal gun violence and injury, and weakened trust in the justice system. Widespread use of microstamping technology would help ensure public safety and prevent crime.
Microstamping technology utilizes lasers to make precise, microscopic engravings on the internal mechanisms of a gun, such as the breech face and firing pin. As the gun is fired, these engravings can imprint a unique alphanumeric array onto the shell casing of the cartridge fired from the gun. This unique array can then be used, like a serial number, to identify the make, model and serial number of the gun. The technology is designed to aid law enforcement officials investigating homicides and other gun crimes by allowing them to trace firearms to their original purchasers through cartridge cases found at crime scenes.
Microstamping represents a significant advancement over existing ballis- tic identification technology. Because the technology of microstamping imprints the identifying characteristics of a firearm onto every cartridge ejected from the gun, investigators need only recover the cartridges at a crime scene to be able to identify the gun used in the commission of the crime. Current ballistics identification technology is much more limited. While it can be used to compare ballistic evidence recovered at crime scenes, it cannot lead investigators directly to a specific firearm that produced the ballistic fingerprint, unless that firearm is recovered.
Incorporating microstamping features in more handgun models sold in New York would likely reduce interpersonal gun violence in this state by aiding law enforcement efforts to solve and deter shootings, homicides, and other gun-related crimes, and prevent cycles of retributive violence from occurring.
Contrary to firearm manufacturers' claims that it is impossible or impractical to produce firearms equipped with microstamping technology, the Sporting Arms and Ammunition Manufacturers' Institute and the National Shooting Sports Foundation have admitted that "microstamped characters that identify the make, model, and serial number of a semi- automatic pistol can be etched or imprinted on the tip of the pistol's firing pin" and tests have shown it is feasible to do the same on the firearm breechface. Additionally, the Ninth Circuit Court of Appeals has held, in upholding California's microstamping requirement, that " THE STATE OF CALIFORNIA produced evidence that compliance with the micro- stamping requirement is "technologically possible" and would cost an incremental $3.00 to $10.00 per gun." Pena v. Lindley, 898 F.3d 969 (9th Cir. 2018).
Microstamping technology is feasible and reliable and the costs of implementing this technology are minimal. Incorporating microstamping technology will help ensure public safety by identifying crime guns, aiding law enforcement in their efforts to prosecute those who use guns to do harm, disrupt cycles of retributive violence and deter future acts of gun violence.
Prior legislative history
S.2277 of 2019-2020 (Hoylman): Died in Codes
A.1251 of 2019-2020 (Jaffee): Died in Codes
S.0470-A of 2017-2018 (Peralta): Died in Codes
S.1113-A of 2015-2016 (Peralta): Died in Codes
S.0068-A of 2013-2014 (Peralta): Died in Codes
S.0675-C of 2012 (Peralta): Died in Rules
S.0675-A of 2011 (Peralta): Died in Codes
S.6005-A of 2009-2010 (Schneiderman): Died on Third Reading
Fiscal implications
To be determined.
Effective date
This act shall take effect January 1, 2025.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.