What's happening
This bill establishes new hoisting safety measures and requires New York's labor commissioner to update safety regulations every ten years.
Why it matters
Mandates more stringent safety practices around cranes and hoisting. The bill sets specific rules about who can be near suspended loads, under what circumstances, and what equipment (like active vs. passive stabilization devices) must be used, which may reduce workplace injuries and fatalities.
Encourages adoption of new safety technologies. By requiring the use of the "best available technologies" and regular regulatory updates, the bill pushes the construction industry to move away from outdated, potentially riskier equipment and practices.
Increases transparency and stakeholder input in safety rulemaking. The law requires public hearings and expert consultation when updating regulations, giving workers, companies, and the public more opportunities to influence workplace safety standards.
Clarifies responsibilities and protocols for high-risk operations. By defining terms such as "fall zone" and specifying when only essential workers can be present, the bill aims to reduce ambiguity and improve enforcement on worksites.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Headline styles
Improve Crane Safety Rules
Plain English, a few words. Used as the page title.
Sponsors
Senator · Senate District 14
No co-sponsors yet.
History
- Referred to labor
Companion bill
The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.
Crane Hoisting Safety Rules
In Assembly Committee · Labor · Sponsor Inez E. Dickens
Full text
2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
8659
IN SENATE
March 28, 2022
Introduced by Sen. COMRIE -- read twice and ordered printed, and when printed to be committed to the Committee on Labor
AN ACT to amend the labor law, in relation to establishing safety measures for hoisting and requiring the commissioner of labor to promulgate rules and regulations pertaining to safety every ten years
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. The labor law is amended by adding a new section 256 to read as follows:
§ 256. Hoisting safety. 1. For the purposes of this section:
(a) "Active load stabilization mechanism" means any external device attached to the bottom hook of a crane or similar lifting machine that stabilizes any load with computerized control and human input in order to enhance worker safety.
(b) "Passive load stabilization mechanism" means any external device attached to the bottom hook of a crane or similar lifting machine that uses the natural environment to manipulate any load with human input.
(c) "Fall zone" means the area, including, but not limited to, the area directly beneath the load, in which it is reasonably foreseeable that partially or completely suspended materials could fall in the event of an accident.
(d) "Tilt-up or tilt-down operation" means raising or lowering a load from horizontal to vertical or from vertical to horizontal.
(e) "Boom free fall" means that only the brake or clutch is used to regulate the descent of the load line from an inclined spar, strut, or other long structural member which supports the upper hoisting tackle on a crane or derrick.
2. Where available, hoisting routes that minimize the exposure of employees to hoisted loads shall be used, to the extent consistent with public safety.
3. While the operator is not moving a suspended load, no employee shall be within the fall zone, except for employees:
(a) engaged in hooking, unhooking or guiding a load;
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD15219-01-2
(b) engaged in the initial attachment of the load to a component or structure; or
(c) operating a concrete hopper or concrete bucket.
4. When employees are engaged in hooking, unhooking, or guiding the load in the initial connection of a load to a component or structure and are within the fall zone, all of the following criteria must be met:
(a) if the materials being hoisted are under three thousand pounds and the swing or spin of the load does not present a risk of critical injury as determined by the project manager or safety engineer, a tagline or other passive load stabilization mechanism shall be used to manually stabilize the materials;
(b) if the materials being hoisted are over three thousand pounds or present a risk of critical injury as determined by the project manager or safety engineer, an active load stabilization mechanism shall be used;
(c) the materials being hoisted shall be rigged to prevent unintentional displacement;
(d) hooks with self-closing latches or their equivalent shall be used, except that "J" hooks shall be permitted to be used for setting wooden trusses; and
(e) the materials shall be rigged by a qualified rigger.
5. Only employees needed to receive a load shall be permitted to be within the fall zone when a load is being landed.
6. During a tilt-up or tilt-down operation:
(a) no employee shall be directly under the load;
(b) only employees essential to the operation shall be permitted in the fall zone, but shall not be permitted to be directly under the load. An employee is essential to the operation if such employee is conducting one of the following operations and the employer can demonstrate it is infeasible for such employee to perform that operation from outside the fall zone:
(i) physically guide the load;
(ii) closely monitor and give instructions regarding the load's movement; or
(iii) either detach the load from or initially attach the load to another component or structure, such as, but not limited to, making an initial connection or installing bracing.
7. Boom free fall is prohibited when an employee is in the fall zone of the boom or load, and load line free fall is prohibited when an employee is directly under the load.
§ 2. Subdivision 2 of section 27 of the labor law is amended by adding a new paragraph g to read as follows:
g. The commissioner shall, every ten years, promulgate rules and regulations, or amend existing rules and regulations relating to outdated and unsafe technologies with the best available technologies at the time of such promulgation or amendment. In developing such rules and regulations, the commissioner shall:
(i) Contract occupational health professionals, industrial safety engineers, and mechanical engineers to provide expert assistance in the replacement of outdated standards; and
(ii) Conduct public hearings on new regulations where businesses, unions, and members of the general public have the opportunity to speak on proposals, provide recommendations, and add amendments.
§ 3. This act shall take effect immediately.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the labor law, in relation to establishing safety meas- ures for hoisting and requiring the commissioner of labor to promulgate rules and regulations pertaining to safety every ten years
Purpose or general idea of bill
The purpose of this bill is for the New York State Department of Labor to establish and enforce rules and safety measures concerning the opera- tion of cranes and heavy equipment in hoisting materials in a construction project.
Summary of specific provisions
Section 1: Amends the labor law by inserting definitions, and safety rules that contractors, construction managers and operators must comply with during the hoisting of equipment and materials on a construction site.
Section 2: Amends the labor law by requiring the commissioner of labor, every ten years, to promulgate rules and regulations or amend existing rules and regulations relating to outdated and unsafe technologies with the best available technologies at the time of such promulgation or amendment.
Section 3: Contains the bill's effective date clause, which provides that the act shall take effect immediately.
Justification
In the City of New York and numerous municipalities throughout our state, high-rise construction protects takes place daily. Construction sites require workers to perform their jobs from varying heights. In order to transport equipment and materials, contractors and construction companies often erect hoists. When these hoists are poorly constructed, improperly operated, or used in a negligent manner, workers face tremen- dous risks of suffering serious, if not, fatal harm.
Many of the workers that assist in hoisting equipment and materials to floors and moves under construction are minorities and immigrants. Workers that are not properly trained in the safe and compliant manner of assisting in the operation of dangerous equipment such as hoists, have a higher propensity of being victims of preventable accidents.
This bill will require construction managers, operators and contractors to comply with the rules and regulations articulated in this amendment. It will also require the commissioner of labor to promulgate new rules and regulations or amend existing rules and regulations every ten years.
Prior legislative history
New Bill
Fiscal implications
None
Effective date
This act shall take effect immediately.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.