Skip to content
A3514Assembly2023-2024 SessionSame asS353

Clarify Floor Area Rules

Official title

“Clarifies the definition of floor area”

Sponsor Linda RosenthalAD-67+20 co-sponsorsAffects Housing
Status
In Assembly Committee
Housing
Impact
8/10
Significant
Passage
0%

Bill progress

Step 2 of 7

In committee · Housing

What's happening

This bill amends the definition of "floor area" in the multiple dwelling law, specifying how tall spaces, mechanical areas, and open covered areas are counted.

Why it matters

  1. Discourages excessively tall residential spaces. By counting areas with higher floor-to-ceiling heights multiple times in the "floor area" calculation, the bill makes it less attractive for developers to create unusually tall rooms, which could otherwise inflate building volumes without counting fully toward density limits.

  2. Limits mechanical space loopholes. Mechanical equipment areas now only get an exemption for up to 5% of a building’s total floor area—meaning developers can no longer designate large, unused spaces as “mechanical” to avoid zoning restrictions, closing a common workaround used to construct taller buildings.

  3. Brings open covered areas into density calculations. By including open areas under buildings (like covered driveways or breezeways) in floor area calculations, the bill prevents developers from using these spaces to circumvent building size or density limits, making overall building mass more accurately regulated.

  4. Aims for more equitable and predictable zoning outcomes. The changes ensure that all usable or mass-contributing spaces are counted consistently, which could lead to more predictable neighborhood character, less out-of-scale development, and fairer application of zoning rules across different projects.

The daily · weekday mornings

Albany, before your first meeting.

Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.

Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.

Who cares

  • Residential developers and building owners

    The bill would count high-ceiling areas multiple times toward floor area, while allowing ground-floor heights up to twenty feet to count only once.

  • Architects and building engineers

    Mechanical equipment space exceeding five percent of dwellings’ gross floor area would count as floor area, affecting building design calculations.

  • Local building and zoning agencies

    The bill would require specified floor-area counting rules to apply notwithstanding other state or local laws.

  • Developers designing buildings over open space

    Open areas beneath dwellings would count toward floor area, with higher covered spaces counted multiple times.

Headline styles

Clarify Floor Area Rules

Plain English, a few words. Used as the page title.

Sponsors

History

  1. Referred to housing
  2. Referred to housing

Companion bill

The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.

S353Senate

Clarify Floor Area Rules

In Senate Committee · Housing, Construction And Community Development · Sponsor Robert Jackson

Impact 8 · Significant0% to pass

Full text

2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗

STATE OF NEW YORK

3514

2023-2024 Regular Sessions

IN ASSEMBLY

February 3, 2023

Introduced by M. of A. L. ROSENTHAL, SEAWRIGHT, STIRPE, CARROLL, COLTON, EPSTEIN, TAYLOR, SIMON, BENEDETTO, GLICK, DINOWITZ, DICKENS, AUBRY, MAGNARELLI, WALLACE, WALKER, GALLAGHER, DAVILA, GONZALEZ-ROJAS, ZINER- MAN, BICHOTTE HERMELYN -- Multi-Sponsored by -- M. of A. COOK -- read once and referred to the Committee on Housing

AN ACT to amend the multiple dwelling law, in relation to the definition of floor area

The People of the State of New York, represented in Senate and Assembly, do enact as follows:

Section 1. The opening paragraph and paragraph b of subdivision 2 of section 26 of the multiple dwelling law, the opening paragraph and paragraph b as amended by chapter 748 of the laws of 1961 and subparagraph 1 of paragraph b as amended by chapter 857 of the laws of 1985, are amended to read as follows:

For the purpose of this section certain words are defined herein but, except where specified, such definitions shall not be held to modify or affect legal interpretations of such terms or words as used in any local law, ordinance, rule or regulation and shall apply in addition to and not in substitution for the provisions of section four of this chapter.

b. "Floor area": the sum of the gross horizontal areas of all of the several floors of a dwelling or dwellings and accessory structures on a lot measured from the exterior faces of exterior walls or from the center line of party walls, (i) except that notwithstanding any other provision of law, general, special, or local, any such areas with floor to structural ceiling height greater than twelve feet and less than or equal to twenty-four feet shall be counted twice, any such areas with floor to structural ceiling height greater than twenty-four feet and less than or equal to thirty-six feet shall be counted three times, any such areas with floor to structural ceiling height greater than thirtysix feet and less than or equal to forty-eight feet shall be counted four times, and any area with floor to structural ceiling height in

EXPLANATION--Matter in italics (underscored) is new; matter in brackets

[ ] is old law to be omitted.

LBD02368-01-3

excess of forty-eight feet shall be counted five times. However, when such areas are on the ground floor of any dwelling or dwellings, their height up to and including twenty feet from floor to structural ceiling shall be counted only once.

(ii) Notwithstanding any other provision of law, general, special, or local, space used for mechanical equipment will be counted as "floor area" to the extent that it exceeds five percent of the gross horizontal areas of all of the several floors of a dwelling or dwellings.

(iii) Notwithstanding any other provision of law, general, special, or local, "floor area" will include any open areas located under the dwelling or dwellings when viewed directly from above. Such areas will be measured from the exterior faces of vertical extensions of the exterior walls of the building that inscribe the open space so covered by the dwelling or dwellings. Such open areas covered by buildings with floor to structural ceiling height in excess of twelve feet shall be counted twice, open areas covered by buildings with floor to structural ceiling height in excess of twenty-four feet shall be counted three times, open areas covered by buildings with floor to structural ceiling height in excess of thirty-six feet shall be counted four times, open areas covered by buildings with floor to structural ceiling height in excess of forty-eight feet shall be counted five times. The following areas shall be excluded from floor area:

(1) cellar space;

(2) attic space providing head room of less than eight feet;

(3) space for mechanical equipment, except as specified in this section;

(4) elevator and stair bulkheads, rooftop tanks and cooling towers;

(5) open or roofed terraces, exterior balconies or porches, uncovered steps and open porte-cocheres or breezeways abutting or adjoining grade entrances that are located beyond the exterior walls of the dwelling or dwellings when viewed directly from above;

(6) accessory space used for off-street motor vehicle parking or storage.

§ 2. This act shall take effect immediately.

Reflowed for reading: line numbers and page breaks removed. Cite the official text.

Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.