What's happening
This bill establishes cybersecurity standards for New York's critical infrastructure, requiring compliance with ISA/IEC 62443 standards for operations, procurement, and maintenance.
Why it matters
Expands the definition of "critical infrastructure". to include not just utilities and transport but also public health facilities, public university buildings, and facilities under the public authorities law—broadening the range of entities subject to cybersecurity standards.
Mandates specific, internationally recognized cybersecurity protocols (ISA/IEC 62443). for both the procurement/construction and ongoing operation/maintenance of critical infrastructure, raising the minimum bar for cyber protections across sectors.
Imposes direct responsibility on "asset owners". (public or private operators) to implement and annually assess cybersecurity risk, creating clear, ongoing accountability for compliance and proactive mitigation of vulnerabilities.
Accelerates state oversight and coordination. , requiring collaboration between the Office of Information Technology, Department of Homeland Security, and other agencies to determine what qualifies as critical infrastructure and ensure standards are effectively applied and enforced.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Headline styles
Set Cybersecurity Rules for Infrastructure
Plain English, a few words. Used as the page title.
Sponsors
No co-sponsors yet.
History
- Referred to internet and technology
- Referred to internet and technology
Companion bill
The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.
Mandate Cyber Standards for Infrastructure
In Assembly Committee · Ways And Means · Sponsor Steven Otis
Full text
3 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
5646
2023-2024 Regular Sessions
IN SENATE
March 10, 2023
Introduced by Sen. THOMAS -- read twice and ordered printed, and when printed to be committed to the Committee on Internet and Technology
AN ACT to amend the state technology law, in relation to enacting the "critical infrastructure standards and procedures act"
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. The state technology law is amended by adding a new article 4 to read as follows:
ARTICLE 4
CRITICAL INFRASTRUCTURE STANDARDS AND PROCEDURES ACT Section 401. Short title.
402. Definitions.
403. Compliance with cybersecurity standards for critical
infrastructure.
404. Procurement, construction, reconstruction, alteration,
design and commissioning of critical infrastructure or
automation control systems or automation control system
components.
405. Operations and maintenance of critical infrastructure.
§ 401. Short title. This article shall be known and may be cited as the "critical infrastructure standards and procedures (CRISP) act".
§ 402. Definitions. The following terms shall have the following meanings:
1. Critical infrastructure shall include, but shall not be limited to:
(a) public transportation;
(b) water and wastewater treatment facilities;
(c) public utilities and services subject to the jurisdiction, supervision, powers and duties of the public service commission and the department of public service;
(d) public buildings, including those operated by the state university of New York;
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD01897-02-3
(e) hospitals and public health facilities regulated pursuant to article twenty-eight of the public health law; and
(f) facilities created or existing under the public authorities law.
2. Automation and control system shall include personnel, hardware, software and policies involved in the operation of the critical infrastructure that may affect or influence its safe, secure and reliable operation.
3. Automation and control system components shall mean control systems and any complementary hardware and software components that have been installed and configured to operate in an automation and control system. Such systems shall include, but shall not be limited to:
(a) control systems, whether physically separate or integrated, including distributed control systems, programmable logic controllers, remote terminal units, intelligent electronic devices, supervisory control and data acquisition, networked electronic sensing and control, and monitoring and diagnostic systems;
(b) associated information systems, such as advanced or multivariable control, online optimizers, dedicated equipment monitors, graphical interfaces, process historians, manufacturing execution systems and plant information management systems;
(c) associated internal, human, network, or machine interfaces used to provide control, safety, and manufacturing operations functionality to continuous, batch, discrete; and
(d) other processes as defined by the international society of automation including the ISA/IEC 62443 series of standards, as referenced by the national institute of standards and technology (NIST).
4. Asset owner shall mean the public or private owner or entity accountable and responsible for operation of the critical infrastructure and for the automation and control system. The asset owner shall be the operator of the automation and control system and of such equipment under control.
5. Operational technology shall mean the hardware and software that detects or causes a change in the critical infrastructure through the direct monitoring or control of physical devices, systems, processes and events.
§ 403. Compliance with cybersecurity standards for critical infrastructure. The office, in consultation with the department of homeland security and emergency services shall make a determination of critical infrastructure, including whose assets, systems, and networks, whether physical or virtual, are considered vital and vulnerable to cybersecurity attacks.
§ 404. Procurement, construction, reconstruction, alteration, design and commissioning of critical infrastructure or automation control systems or automation control system components. On or after July first, two thousand twenty-seven, the asset owner, when procuring automation and control system components, as defined in subdivision three of section four hundred two of this article, services or solutions, or when contracting for facility upgrades or the construction of critical infrastructure facilities, shall require such components, services, and solutions to conform to the ISA/IEC 62443 series of standards. All contracts awarded for construction, reconstruction, alteration, design and commissioning of facilities identified as critical infrastructure under this article shall provide that such installed automation and control components meet the following minimum standards for cybersecurity as defined by the ISA/IEC 62443 series of standards:
1. 2-4 requirements for IACS solutions providers;
2. 3-2 security risk assessment and systems design;
3. 3-3 system security requirements and security levels;
4. 4-1 product development requirements; and
5. 4-2 technical security requirements for IACS components.
§ 405. Operations and maintenance of critical infrastructure. On or after July first, two thousand twenty-five, the asset owner shall be responsible for ensuring that the operation and maintenance of operational technology, including critical infrastructure, automation control systems and automation control system components conform with the following ISA/IEC 62443 series of standards, including annual risk assessments and shall create a mitigation plan:
1. 2-1 requirements for an IACS security management system;
2. 2-3 patch management in the IACS environment;
3. 2-4 security program requirements for service providers;
4. 3-2 security risk assessment and system design; and
5. 3-3 system security requirements and security levels.
§ 2. This act shall take effect on the one hundred eightieth day after it shall have become a law. Effective immediately, the office, the commissioner of homeland security and emergency services and the superintendent of financial services may promulgate rules and regulations and take other actions reasonably necessary to implement this act on that date.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the state technology law, in relation to enacting the "critical infrastructure standards and procedures act"
Purpose or general idea of bill
To protect New York State critical infrastructure from cyberattacks.
Summary of provisions
Section one of the bill amends the state technology law to add a new article 4 titled the "critical infrastructure standards and procedures act."
Section 402 of article 4 establishes various definitions, including "critical infrastructure", "automation and control system," "automation and control system component," "asset owner," and "operational technolo- gy."
Section 403 of article 4 requires the Office of Information Technology (OITS) along with the State Department of Homeland Security and Emergen- cy Services (DHSES) to identify critical infrastructure, both public and private, that could be comprised by cyberattacks.
Section 404 of article 4 requires asset owners of critical infrastruc- ture as defined in Section 402 and identified by OITS and DHSES to be compliant with ISA 62443 cybersecurity standard when procuring Auto- mation and Control System components, services or solutions as defined or when contracting for facility upgrades or the construction of new critical infrastructure facilities by July 1, 2027.
Section 405 of article 4 requires that the asset owner shall be respon- sible for ensuring that the operation and maintenance of operational technology, including critical infrastructure, automation control systems, and automation control system components be compliant with the standards and practices defined in the ISA/IEC 62443 series of stand- ards, including annual risk assessments and the creation of a mitigation plan in the event of a cybersecurity breach by July 1, 2025.
Section two of the bill is the effective date.
Justification
The operational technologies that automate the critical infrastructure and commercial facilities of daily life are experiencing a rapid increase in cybersecurity incidents. The impact is serious, affecting life, safety, the environment, and economic viability across sectors. The recent cybersecurity intrusions of the public water system in Olds- mar, Florida, the shutdown of the Colonial Pipeline by the criminal enterprise Darkside, the intrusion of the Bowman Dam in Rye Brook, New York by Iranian hackers in 2013, and the hacking of numerous federal agencies by suspected Russian hackers underscore the need to provide the public and private sectors with clarity and support on how to improve control systems cybersecurity.
A standard definition of the security capabilities for system components will provide a common language for product suppliers and all other control system stakeholders, simplifying the procurement and integration processes for the computers, applications, network equipment, and control devices that make up a control system.
The United States National Institute of Standards and Technology (NIST) published the NIST Cybersecurity Framework (CSF) which references several relevant cybersecurity standards including ISA/IEC 62443. The NIST CSF was codified into Florida IT cybersecurity standard 60GG-2 as of 2019. The internationally recognized ISA/IEC 62443 family of stand- ards defines a set of measures and benchmarks purpose-built to guide organizations through the process of assessing the risk of a particular automation and control system (OT) and in identifying and applying secu- rity countermeasures to reduce that risk.
Prior legislative history
2021-22: S.7312 (Thomas) - Referred to Internet and Technology.
Fiscal implications for state and local governments
To be determined.
Effective date
This legislation will take effect 180 days after enactment into law except that compliance with the ISA 62443 series of standards for compo- nents is delayed until July 2027 and the operational and maintenance requirements are delayed until July 2025 in order to permit asset owners and product suppliers to become compliant and develop compliant products and solutions.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.