Skip to content
S6246Senate2023-2024 SessionSame asA6225

Change Vehicle Weighing Calibration Standards

Official title

“Relates to calibration checks for weigh in motion violation monitoring systems”

Sponsor Andrew GounardesSD-26Affects Transportation
Status
Signed by Governor
Impact
4/10
Low
Outcome
Signed into law

Bill progress

Signed into law

What's happening

This bill changes calibration standards for New York City’s systems that detect overweight vehicles in motion.

Why it matters

  1. Flexible standards. Replaces a specified ASTM standard with specifications agreed upon by city transportation and state agriculture officials, or an applicable reference standard chosen by city transportation officials.

  2. Checks remain mandatory. Each system must still undergo independent calibration every six months, with a signed certificate issued to the city.

  3. Enforcement records. The city must still retain calibration certificates until all related liability cases are resolved. The change would take effect immediately but expire when the underlying subdivision expires.

The daily · weekday mornings

Albany, before your first meeting.

Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.

Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.

Who cares

  • New York City Department of Transportation

    Could set calibration specifications through an interagency agreement or select an applicable reference standard.

  • New York State Department of Agriculture and Markets

    Would have a role in establishing specifications through an agreement with city transportation officials.

  • Independent calibration laboratories

    Would conduct the required six-month checks under the replacement standards.

  • Vehicle owners facing overweight notices

    Have an interest in the calibration requirements governing systems used to generate notices of liability.

Headline styles

Change Vehicle Weighing Calibration Standards

Plain English, a few words. Used as the page title.

Sponsors

Primary sponsor
Andrew Gounardes

Senator · Senate District 26

Chair, Budget And Revenue

No co-sponsors yet.

History

  1. Signed chap.253
  2. Delivered to governor
  3. Returned to senate
  4. Passed assembly
  5. Home rule request
  6. Ordered to third reading rules cal.823
  7. Substituted for A6225
  8. Referred to transportation
  9. Delivered to assembly
  10. Passed senateVote 45–17
  11. Home rule request
  12. Ordered to third reading cal.1514
Show 2 earlier actions
  1. Committee discharged and committed to rules
  2. Referred to transportation

Companion bill

The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.

A6225Assembly

Update Weigh Station Checks

Assembly Floor Calendar · Sponsor Jo Anne Simon

Impact 4 · Low0% to pass

Full text

1 pageUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗

STATE OF NEW YORK

6246

2023-2024 Regular Sessions

IN SENATE

April 6, 2023

Introduced by Sen. GOUNARDES -- read twice and ordered printed, and when printed to be committed to the Committee on Transportation

AN ACT to amend the vehicle and traffic law, in relation to calibration checks for weigh in motion violation monitoring systems

The People of the State of New York, represented in Senate and Assembly, do enact as follows:

Section 1. Subdivision 3 of section 385-a of the vehicle and traffic law, as added by chapter 773 of the laws of 2021, is amended to read as follows:

3. Each weigh in motion violation monitoring system shall undergo a calibration check every six months in accordance with [American Society for Testing and Materials (ASTM) standard specification E1318-09 (2017). If such standard specification is revised, the New York city department of transportation shall adopt a rule to provide for the use of the most current version of such standard specification] specifications prescribed pursuant to a memorandum of agreement between the New York city department of transportation and the New York state department of agriculture and markets, or in accordance with an applicable reference standard as determined by the New York city department of transportation. Such calibration check shall be performed by an independent calibration laboratory which shall issue a signed certificate of calibration on its letterhead to the city of New York. Nothing contained in this paragraph shall be deemed to require the signature of a notary public on such certificate. The city shall retain each such bi-annual certificate of calibration on file until the final resolution of all cases involving notices of liability issued during such six-month time period which were based on photographs, microphotographs, video or other recorded images, and information and data generated in conjunction therewith, produced by such weigh in motion violation monitoring system.

§ 2. This act shall take effect immediately; provided, however, that the amendments to subdivision 3 of section 385-a of the vehicle and traffic law made by section one of this act shall not affect the repeal of such subdivision and shall expire and be deemed repealed therewith.

EXPLANATION--Matter in italics (underscored) is new; matter in brackets

[ ] is old law to be omitted.

LBD10567-01-3

Reflowed for reading: line numbers and page breaks removed. Cite the official text.

Sponsor's memo

Title of bill

An act to amend the vehicle and traffic law, in relation to calibration checks for weigh in motion violation monitoring systems

Purpose or general idea of bill

To amend the vehicle and traffic law in relation to the calibration checks for weight in motion violation monitoring systems

Summary of provisions

Section 1. Subdivision 3 of section 385-a of the vehicle and traffic law, as added by chapter 773 of the laws of 2021 is amended.

Justification

One reason for the Brooklyn-Queens Expressway (BQE)'s crumbling infras- tructure is the presence of overweight truck traffic. Calibration checks performed by an independent calibration laboratory every six months will enforce violations based on photographs, microphotographs, videos or other recorded itages, and information and data generated by weigh in motion (WIM) monitoring systems.

This bill will allow the New York City Department of Transportation to enter into a memorandum of agreement with the New York State Department of Agriculture an Markets on specifications to be used for the weigh in motion monitoring technology so that the City may begin its WIM pilot program on the BQE.

Prior legislative history

None

Fiscal implications

TBD

Effective date

Immediate

Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.