What's happening
This bill updates requirements for swimming pool enclosures, including gate locking standards and directs the creation of new release mechanism standards.
Why it matters
Stronger security requirements for pool gates. By mandating that gates be kept locked with a childproof lock whenever the pool is unsupervised or not in use, this bill increases the baseline safety measures aimed at preventing unsupervised child access and potential drownings.
Removal of outdated latch placement rule. The previous requirement—that latch handles be within the enclosure and at least 40 inches above ground—is being eliminated, signaling a shift toward more modern or flexible safety solutions rather than relying on a one-size-fits-all physical placement rule.
Statewide modernized standards for gate release mechanisms. The bill directs the State Fire Prevention and Building Code Council to create new standards for pool gate release mechanisms based on internationally recognized safety benchmarks, which could lead to more robust, up-to-date protections and better harmonization with global best practices.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Who cares
Swimming pool owners
The bill would remove the requirement that gate latch handles be inside the enclosure and at least 40 inches above grade, while retaining self-closing, self-latching and childproof locking requirements.
State Fire Prevention and Building Code Council
The bill would direct the council to develop gate release mechanism standards based on internationally recognized standards.
Pool enclosure installers and gate hardware suppliers
The bill would shift release mechanism specifications from the existing statutory placement rule to standards developed by the council.
Headline styles
Tighten Pool Gate Security
Plain English, a few words. Used as the page title.
Sponsors
No co-sponsors yet.
History
- Substituted by A9888C
- Amended on third reading 7731a
- Advanced to third reading
- 2nd report cal.
- 1st report cal.1019
- Referred to housing, construction and community development
- Referred to rules
Companion bill
The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.
Tighten Pool Gate Rules
Signed by Governor · Sponsor John T. McDonald III
Full text
1 pageUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
7731--A Cal. No. 1019
2023-2024 Regular Sessions
IN SENATE
November 1, 2023
Introduced by Sen. GALLIVAN -- read twice and ordered printed, and when printed to be committed to the Committee on Rules -- recommitted to the Committee on Housing, Construction and Community Development in accordance with Senate Rule 6, sec. 8 -- reported favorably from said committee, ordered to first and second report, ordered to a third reading, amended and ordered reprinted, retaining its place in the order of third reading
AN ACT to amend the executive law, in relation to swimming pool enclosures
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. Paragraph a of subdivision 14 of section 378 of the executive law, as separately amended by chapters 75 and 234 of the laws of 2007, is amended to read as follows:
a. gates required to be provided in a swimming pool enclosure shall be self-closing and self-latching [with the latch handle located within the enclosure and at least forty inches above grade], and shall be securely locked with a key, combination or other child proof lock sufficient to prevent access to such swimming pool through such gate when such swimming pool is not in use or supervised. Release mechanism standards shall be developed by the state fire prevention and building code council based on internationally recognized standards;
§ 2. This act shall take effect December 31, 2025. Effective immediately, the addition, amendment, and/or repeal of any rule or regulation necessary for the implementation of this act on its effective date are authorized to be made and completed on or before such effective date.
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD13322-08-4
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the executive law, in relation to swimming pool enclo- sures
PURPOSE::
To authorize the New York State fire prevention and building code coun- cil to align the current New York State statutory provisions governing swimming pool enclosure gates with language from the International Swim- ming Pool and Spa Code and the American Society for Testing and Materi- als (1STM) Code, which are the basis of most pool ordinances in the United States of America.
SUMMARY OF PROVISIONS::
Section 1 of the bill strikes language requiring swimming pool gate latch handles be located within the enclosure and at least 40 inches above grade, by adding new language to authorize the New York State fire prevention and building code council to develop release mechanism stand- ards based on internationally recognized standards.
Section 2 establishes the effective date.
JUSTIFICATION::
Drowning is the leading cause of unintentional injury-related death for children ages 1 - 4 years nationwide and the requirement that swimming pools be enclosed with self-closing and self-latching gates is pivotal in preventing these fatalities.
New York's current law specific to swimming pool enclosures includes prescriptive language, codified in 1997 (see Chapter 636) that is outdated. Importantly, the law provides that a swimming pool enclosure gate latching mechanism must always be installed on the inside of the enclosure, regardless of the height of the enclosure.
Since the enactment of the swimming pool enclosure safety provisions in 1997, consumer demand for more privacy surrounding a swimming pool has resulted in the increased installation of taller enclosures, often 6 feet in height.
Unfortunately, the strict requirements set forth under the statute may limit response times of emergency first responders and/or bystanders from rescuing a distressed swimmer, due to the difficulty in gaining access to a gate latching mechanism by an adult that is installed on the inside of a 6-foothigh enclosure. Moreover, anecdotal information indi- cates that homeowners intentionally prop open such gates for maintenance workers or lawn service providers, again due to the difficulty in gain- ing access to such latching mechanism, creating a significant safety hazard.
Updating the aforementioned law to be consistent with the broadly adhered to International Swimming Pool and Spa Code and the ASTM Code, will provide the necessary leeway to install a latching mechanism on the outside, where warranted, while maintaining the existing requirement to install such mechanism on the inside of lower height enclosures. Doing so will further enhance pool safety and better protect children.
LEGISLATIVE HISTORY::
New bill.
FISCAL IMPLICATIONS::
None.
EFFECTIVE DATE::
Immediately.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.