What's happening
This bill requires at least two photo speed violation monitoring systems in highway construction or maintenance work areas on controlled-access highways and the thruway.
Why it matters
Mandates, rather than merely allows, the installation of speed cameras. This change shifts from permitting the use of photo speed violation monitoring systems to requiring their deployment, indicating a firmer commitment to automated traffic enforcement in work zones.
Removes the cap on the number of monitored work zones. The prior law limited speed cameras to no more than 20 areas on controlled-access highways and 10 on the thruway; those limits are eliminated, which could lead to broader use and potentially greater coverage of work zones.
Eliminates criteria-based selection for camera placement. Previously, selection of camera locations had to consider speed data, crash history, and roadway geometry. This requirement is removed, giving officials more discretion in choosing work zones for camera installation, possibly allowing faster deployment but less targeted risk reduction.
Aims to enhance worker safety and potentially increase driver accountability. By requiring at least two speed cameras in such areas, the bill seeks to deter speeding and protect road workers, but could also increase the number of tickets issued to drivers, impacting motorists passing through work zones.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Headline styles
Require Speed Cameras in Work Zones
Plain English, a few words. Used as the page title.
Sponsors
No co-sponsors yet.
History
- Referred to rules
Full text
2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
9884
IN SENATE
July 31, 2024
Introduced by Sen. BORRELLO -- read twice and ordered printed, and when printed to be committed to the Committee on Rules
AN ACT to amend the vehicle and traffic law, in relation to requiring at least two photo speed violation monitoring systems in highway construction or maintenance work areas located on a controlled-access highway or on the thruway
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. Paragraphs 1 and 2 of subdivision (a) of section 1180-e of the vehicle and traffic law, as added by chapter 421 of the laws of 2021, are amended to read as follows:
1. Notwithstanding any other provision of law, the commissioner of transportation is hereby authorized to establish a demonstration program imposing monetary liability on the owner of a vehicle for failure of an operator thereof to comply with posted maximum speed limits in a highway construction or maintenance work area located on a controlled-access highway (i) when highway construction or maintenance work is occurring and a work area speed limit is in effect as provided in paragraph two of subdivision (d) or subdivision (f) of section eleven hundred eighty of this article or (ii) when highway construction or maintenance work is occurring and other speed limits are in effect as provided in subdivision (b) or (g) or paragraph one of subdivision (d) of section eleven hundred eighty of this article. Such demonstration program shall [empower] require the commissioner to install at least two photo speed violation monitoring systems within [no more than twenty] highway construction or maintenance work areas located on controlled-access highways and to operate such systems within such work areas (iii) when highway construction or maintenance work is occurring and a work area speed limit is in effect as provided in paragraph two of subdivision (d) or subdivision (f) of section eleven hundred eighty of this article or (iv) when highway construction or maintenance work is occurring and other speed limits are in effect as provided in subdivision (b) or (g) or paragraph one of subdivision (d) of section eleven hundred eighty of this article. The commissioner, in consultation with the superintendent
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD15905-01-4
of the division of state police, shall determine the location of the highway construction or maintenance work areas located on a controlledaccess highway in which to install and operate photo speed violation monitoring systems. [In selecting a highway construction or maintenance work area in which to install and operate a photo speed violation monitoring system, the commissioner shall consider criteria including, but not limited to, the speed data, crash history, and roadway geometry applicable to such highway construction or maintenance work area.] A photo speed violation monitoring system shall not be installed or operated on a controlled-access highway exit ramp.
2. Notwithstanding any other provision of law, after holding a public hearing in accordance with the public officers law and subsequent approval of the establishment of a demonstration program in accordance with this section by a majority of the members of the entire board of the thruway authority, the chair of the thruway authority is hereby authorized to establish a demonstration program imposing monetary liability on the owner of a vehicle for failure of an operator thereof to comply with posted maximum speed limits in a highway construction or maintenance work area located on the thruway (i) when highway construction or maintenance work is occurring and a work area speed limit is in effect as provided in paragraph two of subdivision (d) or subdivision (f) of section eleven hundred eighty of this article or (ii) when highway construction or maintenance work is occurring and other speed limits are in effect as provided in subdivision (b) or (g) or paragraph one of subdivision (d) of section eleven hundred eighty of this article. Such demonstration program shall [empower] require the chair to install at least two photo speed violation monitoring systems within [no more than ten] highway construction or maintenance work areas located on the thruway and to operate such systems within such work areas (iii) when highway construction or maintenance work is occurring and a work area speed limit is in effect as provided in paragraph two of subdivision (d) or subdivision (f) of section eleven hundred eighty of this article or (iv) when highway construction or maintenance work is occurring and other speed limits are in effect as provided in subdivision (b) or (g) or paragraph one of subdivision (d) of section eleven hundred eighty of this article. The chair, in consultation with the superintendent of the division of state police, shall determine the location of the highway construction or maintenance work areas located on the thruway in which to install and operate photo speed violation monitoring systems. [In selecting a highway construction or maintenance work area in which to install and operate a photo speed violation monitoring system, the chair shall consider criteria including, but not limited to, the speed data, crash history, and roadway geometry applicable to such highway construction or maintenance work area.] A photo speed violation monitoring system shall not be installed or operated on a thruway exit ramp.
§ 2. This act shall take effect on the ninetieth day after it shall have become a law; provided, however, that the amendments to section 1180-e of the vehicle and traffic law made by section one of this act shall not affect the repeal of such section and shall be deemed repealed therewith. Effective immediately, the addition, amendment, and/or repeal of any rule or regulation necessary for the implementation of this act on its effective date are authorized to be made and completed on or before such effective date.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Sponsor's memo
Title of bill
An act to amend the vehicle and traffic law, in relation to requiring at least two photo speed violation monitoring systems in highway construction or maintenance work areas located on a controlled-access highway or on the thruway
Purpose
The bill would require at least two photo speed violation monitoring systems in work zone areas located on a controlled-access highway or on the thruway.
Summary of provisions
Section 1: removes selecting a highway construction or maintenance work area in which to install and operate a photo speed violation monitoring system.
Read the full memo (642 words)
The chair of the thruway authority is authorized to establish a demon- stration program that shall require the installation of at least two photo speed violation monitoring systems within highway construction or maintenance work areas located on the thruway.
Section 2: This act shall take effect on the ninetieth day after it shall have become a law; provided, however, that the amendments t o section 19 1180e of the vehicle and traffic law made by section one of this act 20 shall not affect the repeal of such section and shall be deemed repealed 21 therewith. Effective immediately, the addition, amendment, and/or 22 repeal of any rule or regulation necessary for the implementation of 23 this act on its effective date are authorized to be made and completed 24 on or before such effective date
Justification
The five-year Automated Work Zone Speed Enforcement (AWZSE) program, overseen by the New York State Department of Transportation (DOT ) and the Thruway Authority, began in May 2023. The program has already iden- tified over 130,000 speeding violations in work zones statewide. Currently, law limits the installation of these monitoring systems to a maximum of ten sites on the thruway, operational only when construction is underway, and a work zone speed limit is in effect. This restriction leaves many work sites unmonitored, increasing the risk of accidents and injuries for both drivers and construction workers.
The proposed amendment to the legislation addresses this issue by elimi- nating the option for the chair of the Thruway Authority to in stall a limited number of photo speed violation monitoring systems. Instead, it mandates the installation of at least two such system s in highway construction or maintenance work areas located on controlled-access highways or the thruway. Highway and Thruway construction and mainte- nance zones are particularly hazardous for workers due to the high speeds of passing vehicles. Additionally, with current shortages in the police force, it's less likely that officers can be stationed at every work zone. By mandating the installation of two photo speed violation monitoring systems in each work zone, the bill aims to deter speeding and reduce the risk of accidents and injuries, even in the absence of a physical police presence at every site.
Overall, this legislation represents a proactive effort to enhance safe- ty in highway construction and maintenance zones. By mandating the installation of at least two photo speed violation monitoring systems in each work area, it demonstrates a strong commitment to protecting both workers and drivers. This measure not only aims to prevent accidents and injuries but also promotes a culture of cautious and responsible driving in areas where the safety of road workers is critical.
Effective date
This act shall take effect on the ninetieth day after it shall have become a law; provided, however, that the amendments to section 1 9 1180-e of the vehicle and traffic law made by section one of this act 20 shall not affect the repeal of such section and shall be deemed repealed 21 therewith. Effective immediately, the addition, amendment, and/or 22 repeal of any rule or regulation necessary for the implementation of 23 this act on its effective date are authorized to be made and completed 24 on or before such effective date
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.