Skip to content
S9405Senate2021-2022 SessionSame asA10439

Stricter Building Efficiency Rules

Official title

“Establishes the "Advanced Building Codes, Appliance and Equipment Efficiency Standards Act of 2022"”

Sponsor Kevin S. ParkerSD-21+1 co-sponsorAffects Finance
Status
Signed by Governor
Impact
8/10
Significant
Outcome
Signed into law

Bill progress

Signed into law

What's happening

This bill updates and expands New York's building, appliance, and equipment efficiency standards to advance clean energy and reduce greenhouse gas emissions.

Why it matters

  1. Broadens state authority to set and enforce energy and water efficiency standards. The bill gives New York officials expanded powers to establish, update, and enforce efficiency rules for a much wider range of products—including commercial appliances, lighting, electronics, HVAC equipment, and water fixtures—meaning more products sold or installed in the state will need to meet minimum performance criteria.

  2. Aligns building codes and appliance standards with greenhouse gas reduction goals. By explicitly linking efficiency standards and building codes to the state’s climate law (the Climate Leadership and Community Protection Act), the bill makes energy codes a tool for achieving mandated reductions in greenhouse gas emissions, potentially impacting how homes and businesses are constructed and renovated.

  3. Future-proofs New York’s standards against federal rollbacks. If federal efficiency standards are weakened, repealed, or no longer enforced, New York will automatically keep those standards in place at the state level, ensuring continued consumer and environmental protections even if federal policy changes.

  4. Strengthens compliance, enforcement, and stakeholder input. The legislation adds rigorous mechanisms for compliance (including subpoenas, investigations, penalties, and certifications), creates specific roles for the Department of State and NYSERDA, and requires public input—especially from disadvantaged communities—when developing standards, aiming to ensure equity, transparency, and real-world effectiveness.

The daily · weekday mornings

Albany, before your first meeting.

Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.

Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.

Who cares

  • Builders and building owners

    The bill would change energy-code cost-effectiveness reviews to consider savings over a building’s design life and societal effects, while directing the code council to seek greater energy savings than national model codes where cost-effective.

  • Appliance manufacturers, retailers and installers

    The bill would expand products covered by state efficiency standards and extend compliance requirements to leasing, renting and offers to install covered products.

  • NYSERDA and the Department of State

    The bill would give NYSERDA the lead role in setting appliance efficiency standards and provide the Department of State with expanded investigation and enforcement powers.

  • Historic building owners and preservation advocates

    The bill would replace the blanket energy-code exemption for historic buildings with authority to grant exemptions where compliance would threaten, degrade or destroy historic form, fabric or function.

Headline styles

Stricter Building Efficiency Rules

Plain English, a few words. Used as the page title.

Sponsors

Primary sponsor
Kevin S. Parker

Senator · Senate District 21

Chair, Energy And Telecommunications

1 Co-sponsor

History

  1. Signed chap.374
  2. Delivered to governor
  3. Returned to senate
  4. Passed assembly
  5. Ordered to third reading rules cal.514
  6. Substituted for A10439
  7. Referred to ways and means
  8. Delivered to assembly
  9. Passed senateVote 44–19
  10. Ordered to third reading cal.1618
  11. Committee discharged and committed to rules
  12. Referred to energy and telecommunications

Companion bill

The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.

A10439Assembly

Tougher Energy Standards for Buildings

Assembly Floor Calendar · Sponsor Patricia Fahy

Impact 8 · Significant0% to pass

Full text

23 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗

STATE OF NEW YORK

9405

IN SENATE

May 24, 2022

Introduced by Sen. PARKER -- read twice and ordered printed, and when printed to be committed to the Committee on Energy and Telecommunications

AN ACT to amend the energy law, the executive law and the state finance law, in relation to establishing the "advanced building codes, appliance and equipment efficiency standards act of 2022"

The People of the State of New York, represented in Senate and Assembly, do enact as follows:

Section 1. This act shall be known and may be cited as the "advanced building codes, appliance and equipment efficiency standards act of 2022".

§ 2. Subdivision 2 of section 3-101 of the energy law, as amended by chapter 253 of the laws of 2013, is amended to read as follows:

2. to encourage conservation of energy and to promote the clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, in the construction and operation of new commercial, industrial, agricultural and residential buildings, and in the rehabilitation of existing structures, through heating, cooling, ventilation, lighting, insulation and design techniques and the use of energy audits and life-cycle costing analysis;

§ 3. Subdivisions 3 and 9 of section 11-102 of the energy law, as added by chapter 560 of the laws of 2010, are amended, subdivisions 11, 12, 13, 14 and 15 are renumbered to be subdivisions 12, 13, 14, 15 and 16, and a new subdivision 11 is added to read as follows:

3. ["ASHRAE 90.1-2007." ANSI/ASHRAE/IESNA] "ASHRAE 90.1." ANSI/ASHRAE/IES Standard [90.1-2007] 90.1, entitled "Energy [Standards] Standard for Buildings Except Low-Rise Residential Buildings," published by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.

9. "Historic building." Any building that is one or more of the following: (a) listed, or certified as eligible for listing, on the national register of historic places or on the state register of histor-

EXPLANATION--Matter in italics (underscored) is new; matter in brackets

[ ] is old law to be omitted.

LBD15946-01-2

ic places, (b) [determined by the commissioner of parks, recreation and historic preservation to be eligible for listing on the state register of historic places] designated as historic under an applicable state or local law, or (c) [determined by the commissioner of parks, recreation and historic preservation to be a contributing building to an historic district that is listed or eligible for listing on the state or national registers of historic places, or (d) otherwise defined as an historic building in regulations adopted by the state fire prevention and building code council] certified as a contributing resource within a national register-listed, state register-listed, or locally designated historic district.

11. "Life-cycle cost." An estimate of the total cost of acquisition, operation, maintenance, and construction of any energy system within or related to a building over the design life of the building. "Life-cycle cost" includes, but is not limited to, the cost of fuel, materials, machinery, ancillary devices, labor, service, replacement, and repairs.

§ 4. Paragraph (b) of subdivision 1 and subdivisions 2 and 3 of section 11-103 of the energy law, paragraph (b) of subdivision 1 as added and subdivision 2 as amended by chapter 560 of the laws of 2010 and subdivision 3 as amended by chapter 292 of the laws of 1998, are amended to read as follows:

(b) The code shall apply to the construction of any new building. The code shall also apply to an addition to, and alteration of, any existing building or building system; provided, however, that the code shall not be interpreted to require any unaltered portion of the existing building or building system to comply with the code. The code shall [not apply to the following provided that the energy use of the building is not increased:

(1) storm windows installed over existing fenestration;

(2) glass only replacements in an existing sash and frame;

(3) existing ceiling, wall or floor cavities exposed during construction provided that these cavities are filled with insulation;

(4) construction where the existing roof, wall or floor cavity is not exposed;

(5) reroofing for roofs where neither the sheathing nor the insulation is exposed; roofs without insulation in the cavity and where the sheathing or insulation is exposed during reroofing shall be insulated either above or below the sheathing;

(6) replacement of existing doors that separate conditioned space from the exterior shall not require the installation of a vestibule or revolving door, provided, however, that an existing vestibule that separates such conditioned space from the exterior shall not be removed;

(7) alterations that replace less than fifty percent of the luminaires in a space, provided that such alterations do not increase the installed interior lighting power;

(8) alterations that replace only the bulb and ballast within the existing luminaires in a space provided that the alteration does not increase the installed interior lighting power; and

(9) any other exception] be subject to such other exceptions as may be adopted by the state fire prevention and building code council provided that such [exception will] exceptions shall not prevent the attainment of the compliance goals set forth in section 410(2)(c) of the American Recovery and Reinvestment Act of 2009.

2. (a) The state fire prevention and building code council is authorized, from time to time as it deems appropriate and consistent with the purposes of this article, to review and amend the code, or adopt a new code, through rules and regulations provided that the code remains cost effective with respect to building construction in the state. In determining whether the code remains cost effective, the code council shall consider [whether the cost of materials and their installation to meet its standards would be equal to or less than the present value of energy savings that could be expected over a ten year period in the building in which such materials are installed] (i) whether the life-cycle costs for a building will be recovered through savings in energy costs over the design life of the building under a life-cycle cost analysis performed under methodology as established by the New York state energy research and development authority in regulations which may be updated from time to time, and (ii) secondary or societal effects, such as reductions in greenhouse gas emissions, as defined in regulations. Before publication of a notice of proposed rule making establishing the methodology or defining secondary or societal effects, the president of the authority shall conduct public meetings to provide meaningful opportunities for public comment from all segments of the population that would be impacted by the regulations, including persons living in disadvantaged communities as identified by the climate justice working group established under section 75-0111 of the environmental conservation law. For residential buildings, the code shall meet or exceed the then most recently published International Energy Conservation Code, or achieve equivalent or greater energy savings; and for commercial buildings, the code shall meet or exceed the then most recently published ASHRAE [90.1-2007] 90.1, or achieve equivalent or greater energy savings.

(b) When adopting the first amended version of the code next following the effective date of the chapter of the laws of two thousand twenty-two that added this paragraph and any subsequent codes, the state fire prevention and building code council shall use its best efforts to adopt provisions for residential buildings that achieve energy savings greater than energy savings achieved by the then most recently published International Energy Conservation Code and to adopt provisions for commercial buildings that achieve energy savings greater than energy savings achieved by the then most recently published ASHRAE 90.1, both at levels recommended by the New York state energy research and development authority, provided that the state fire prevention and building code council determines that such advanced energy savings can be achieved while still meeting the cost effectiveness considerations contemplated by this subdivision.

3. Notwithstanding any other provision of law, the state fire prevention and building code council in accordance with the mandate under this article shall have exclusive authority among state agencies to promulgate a construction code incorporating energy conservation features and clean energy features applicable to the construction of any building, including but not limited to greenhouse gas reduction. Any other code, rule or regulation heretofore promulgated or enacted by any other state agency, incorporating specific energy conservation and clean energy requirements applicable to the construction of any building, shall be superseded by the code promulgated pursuant to this section. Notwithstanding the foregoing, nothing in this section shall be deemed to expand the powers of the council to include matters that are exclusively within the statutory jurisdiction of the public service commission, the department of environmental conservation, the office of renewable energy siting or another state entity.

§ 5. Subdivision 5 of section 11-104 of the energy law, as amended by chapter 560 of the laws of 2010, is amended and a new subdivision 6 is added to read as follows:

5. The [code shall exempt from such uniform standards and requirements any historic building as defined in section 11-102 of this article] state fire prevention and building code council, in consultation with the commissioner of the department of parks, recreation and historic preservation, is authorized to adopt exemptions to such uniform standards and requirements for historic buildings as defined in section 11-102 of this article, to the extent that the uniform standards and requirements would threaten, degrade, or destroy the historic form, fabric, or function of such historic buildings.

6. To the fullest extent feasible, the standards for construction of buildings in the code shall be designed to help achieve the state's clean energy and climate agenda, including but not limited to greenhouse gas reduction, set forth within chapter one hundred six of the laws of two thousand nineteen, also known as the New York state climate leadership and community protection act, and as further identified by the New York state climate action council established pursuant to section 75-0103 of the environmental conservation law.

§ 6. The article heading of article 16 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:

APPLIANCE AND EQUIPMENT [ENERGY] EFFICIENCY STANDARDS

§ 6-a. Section 16-102 of the energy law is amended by adding a new subdivision 1-a to read as follows:

1-a. "Product" means any appliance or equipment, other than a motor vehicle, which in operation consumes or is designed to consume energy or to result in the consumption of energy, including any water-related appliance, equipment or fixture that is designed to consume or result in the consumption of energy in its operation or use.

§ 7. Subdivision 4-a of section 16-102 of the energy law, as added by chapter 222 of the laws of 2010, is amended to read as follows:

4-a. ["Bottle-type water dispenser" means a water dispenser that uses a bottle or reservoir as the source of potable water.] The following definitions refer to water coolers:

(a) "Bottle-type" means a water dispenser that uses a bottle or reservoir as the source of potable water.

(b) "Water cooler" means a freestanding device that consumes energy to cool and/or heat potable water.

(c) "Cold only units" means units that dispense cold water only.

(d) "Hot and cold units" means units that dispense both hot and cold water. Some units may also offer room-temperature water.

(e) "Cook and cold units" means units that dispense both cold and room-temperature water.

(f) "Point of use (POU)" means the water cooler is connected to a pressurized water source.

(g) "Conversion-type" means a unit that ships as either bottle-type or POU and includes a conversion kit intended to convert the water cooler from a bottle-type unit to a POU unit or to convert a POU unit to a bottle-type unit.

(h) "Storage-type" means thermally conditioned water is stored in a tank in the water cooler and is available instantaneously.

(i) "On demand" means the water cooler heats water as it is requested, which typically takes a few minutes to deliver.

§ 8. Subdivision 11 of section 16-102 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:

11. "Consumer audio and video product" means [televisions,] a mainsconnected product that amplifies audio, offers optical, offers disc player functionality, and/or receives and plays audio and/or video content. Examples of consumer audio and video products include compact audio products, digital versatile disc players, digital versatile disc recorders, [and] digital television adapters and streaming media players. Televisions are specifically excluded from consumer audio and video products.

§ 9. Subdivision 18 of section 16-102 of the energy law, as added by chapter 431 of the laws of 2005, is amended to read as follows:

Reflowed for reading: line numbers and page breaks removed. Cite the official text.

Sponsor's memo

Title of bill

An act to amend the energy law, the executive law and the state finance law, in relation to establishing the "advanced building codes, appliance and equipment efficiency standards act of 2022"

Purpose or general idea of bill

To remove current barriers in the Energy Law that could impede the adoption of updates to the State Energy Conservation Construction Code (Energy Code) needed to align the Energy Code with the clean energy and climate policies and goals of the State, as well as increase the state's efficiency standards for appliances.

Summary of provisions

Section 1 of the bill would title this bill as the "Advanced Building Codes, Appliance and Equipment Efficiency Standards Act of 2022."

Read the full memo (1,422 words)

Section 2 of this bill would amend subdivision 2 of section 3-101 of the Energy Law by adding the encouragement of clean energy and implementa- tion of the climate agenda set forth within the Climate Leadership and Community Protection Act to a statement of the State's energy policy relating to the construction and operation of new buildings and in the rehabilitation of existing buildings.

Section 3 of this bill would amend section 11-102 of the Energy Law by revising the definition of "ASHRAE 90.1,", "Historic building" and adds a new definition of "life-cycle cost." by removing the fixed list of changes to existing buildings that are automatically exempt from the Energy Code, and allows the Code Council to determine which exceptions, if any, should be included in the Energy Code and provides that for the purposes of considering the cost effectiveness of proposed amendments to the Energy Code, a life-cycle cost analysis should be used, and second- ary or societal effects, such as reductions in carbon emissions, should be considered. The Authority shall conduct public meetings to provide opportunities for public comment from individuals that could be impacted by regulations, including individuals living in disadvantaged communi- ties as identified by the Climate Justice Working Group. Nothing in this section shall be deemed to expand the powers of the Building Code Coun- cil to include matters that are exclusively within the statutory juris- diction of the Public Service Commission (PSC), Department of Environ- mental Conservation (DEC), Office of Renewable Energy Siting (ORES)or another State entity.

Section 5 of this bill would amend section 11-104 of the Energy Law by adding a new subdivision 6, which will provide that the Energy Code shall be designed to help achieve the State's clean energy and climate agenda set forth within the Climate Leadership and Community Protection Act. The Building Code Council, in consultation with the Commissioner of the Department of Parks, Recreation and Histo/Ic Preservation, is authorized to provide exemptions to the standards and requirements that would threaten, degrade or destroy the historic form, fabric or function of historic buildings.

Sections 6 of this bill would amend the article heading of Article 16 of the Energy Law. Section 6-a amends section 16-102 of the Energy Law by adding a new subdivision 1-a to define "product," meaning any appliance or equipment, other than a motor vehicle, which in operation consumes or is designed to consume energy or to result in the consumption of energy, including any water-related appliance, equipment or fixture that is designed to consume or result in the consumption of energy in its opera- tion or use.

Sections 7 through 13 of this bill would amend section 16-102 of the energy law to modify existing definitions and add new definitions for products that would be covered by this bill.

Section 14 of this bill would amend section 16-104 of the Energy Law to provide for revisions to the applicability and enforcement of this act. The adoption of efficiency standards for any water-related appliances, equipment or fixtures shall be subject to the approval of the Commis- sioner of the Department of Environmental Conservation. When adopting flexible demand appliance standards, the New York State Energy Research and Development Authority (NYSERDA) shall consider cybersecurity proto- cols, and at a minimum, the North American Electric Reliability Corpo- ration's Critical Infrastructure Protection Standards.

Section 15 of this bill would add a new section 16-105 to the Energy Law to authorize the adoption, by regulation, all currently applicable Federal energy and water efficiency standards. The Federal efficiency standards shall remain in effect in the State unless amended or rescind- ed by NYSERDA.

Section 16 of this bill would amend section 16-106 of the Energy Law to provide express authority to the President of NYSERDA, in consultation with the Secretary of State, to establish energy and water efficiency performance standards and promulgate regulations to achieve them, conduct investigations and reporting requirements. Pursuant to this section, efficiency standards and regulations established by NYSERDA and the Secretary of State shall not result in a net increase in co-pollu- tant emissions or otherwise disproportionately burden disadvantaged communities as identified by the Climate Justice Working Group. NYSERDA shall conduct public meetings to provide opportunities for public comment prior to adopting a proposed standard or regulation. NYSERDA and the Department of State are required to submit a report to the Governor and Legislature on the status of efficiency standards regulations by March of 2026. New efficiency standards should be developed whenever feasible in coordination with similar efforts by other states.

Sections 17 and 18 of this bill would amend sections 16-107 and 16-108 of the Energy Law to provide for investigation and enforcement of violations under this act related to appliance and product standards to provide the Secretary of State with the power and authority to enforce standards and issue fines for violations or refer investigations to the Attorney General for enforcement.

Section 19 of this bill would amend section 16 by adding a new section 16-109 of the Energy Law to address potential conflicts of laws.

Section 20 of this bill would amend section 94-a of the Executive Law to grant the Secretary of State authority to enforce appliance standards.

Section 21 of this bill would amend section 374 of the Executive Law to authorize the Commissioner of the Department of Environmental Conserva- tion and the President of NYSERDA to be appointed to the Building Code Council.

Section 22 of this bill would amend section 374 of the Executive Law to require the Building Code Council to, at a minimum, meet quarterly.

Section 23 section 97-www of the State Finance Law to provide for admin- istration of certain funds derived from enforcement or settlements under this act.

Section 24 would clarify that substance under .review but not yet listed by the United States Environmental Protection Agency pursuant to 42 U.S.0 7671K may be allowed for use if such substance has a lower global warming potential than alternative substances and is in accordance with nationally recognized standards that protect building occupant safety and reduce fire risks.

Section 25 is the effective date.

Justification

Buildings are the single largest user of energy in the State of New York, accounting for almost 6096 of all energy consumed by end-use in the State. Building energy codes govern new buildings and modifications to existing buildings, directly impacting a building's energy load and carbon footprint. Increasing the efficiency of buildings will have a significant impact on New York's energy use and have a major impact in achieving our energy and climate goals. Increasing the efficiency of buildings will reduce our power demand and decrease our environmental impact while reducing the cost of operating a building.

Furthermore, product and appliance standards prevent New Yorkers from wasting money in the use of everyday items by setting performance and efficiency standards that reduce energy use, paying for themselves. Adoption of energy efficiency and GHG standards will conserve energy, reduce pollution and save money. Analysis shows that energy efficiency product standards have the potential to deliver the reduction of over 36 million metric tons of carbon dioxide equivalent (co2e) emissions over the lifetime of measures in place by 2030 - equivalent to removing an average of half a million cars from the road each year.

The proposed product and appliance standards will deliver a projected $15 billion of total utility bill savings by 2035 for New York consum- ers, including an estimated $6 billion in total utility bill savings for low-to moderate-income households. This legislation also provides DOS with enforcement authority over any state standards.

Prior legislative history

This is a new bill.

Fiscal implications for state and local governments

To be determined.

Effective date

This act takes effect immediately, except that section 6 through section 23 would take effect 180 days after enactment.

Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.