What's happening
This bill requires large trucks in New York City and state fleet vehicles to be equipped with side under-ride guards for pedestrian, bicyclist, and vehicle safety.
Why it matters
Significant safety upgrade for urban streets. By mandating side under-ride guards on large trucks in NYC and on state fleet vehicles, the bill targets some of the most deadly collision scenarios for pedestrians, cyclists, and occupants of smaller vehicles—potentially reducing fatalities and severe injuries in dense urban environments.
Targeted exemptions and practical flexibility. The law allows the commissioner to grant exemptions for fleet vehicles if installing guards is impractical or would disrupt essential public safety or health services, or if there are supply chain limitations—balancing safety goals with operational realities.
Statewide fleet leadership and ripple effects. By requiring all state-owned vehicles over 10,000 pounds to have these guards, New York sets a precedent that could influence municipal fleets, private contractors, and other states, potentially driving broader adoption of under-ride guards across the trucking industry.
Administrative and regulatory implications. The bill grants significant authority to state transportation officials to define technical standards, inspection protocols, and enforcement, which means effective implementation will depend on the development of robust and clear rules that keep up with evolving vehicle designs and technologies.
Albany, before your first meeting.
Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.
Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.
Who cares
Truck owners and freight carriers
The bill would require side under-ride guards on covered New York-registered conventional-cab trucks rated at 26,000 pounds or more when operating on non-controlled-access highways in cities of at least one million people, starting 24 months after the provision takes effect.
State fleet managers
State fleet vehicles rated above 10,000 pounds would need side under-ride guards after 24 months, with rules allowing exceptions for impractical installations, service disruptions, vendor capacity limits and replacement cycles.
Pedestrians, bicyclists and passenger vehicle occupants
The required guards would be designed to keep pedestrians and bicyclists out of exposed spaces between truck axles and prevent passenger vehicles from sliding underneath.
Department of Motor Vehicles and Department of Transportation
The motor vehicles commissioner would set installation rules in consultation with the transportation commissioner and could establish inspection and compliance specifications.
Headline styles
Require Truck Side Guards
Plain English, a few words. Used as the page title.
Sponsors
1 Co-sponsor
History
- Referred to transportation
Companion bill
The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.
Require Truck Safety Guards
In Senate Committee · Transportation · Sponsor Andrew Gounardes
Full text
2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗
STATE OF NEW YORK
9799
IN ASSEMBLY
April 9, 2024
Introduced by M. of A. GALLAGHER -- read once and referred to the Committee on Transportation
AN ACT to amend the vehicle and traffic law, in relation to certain requirements for side under-ride guards
The People of the State of New York, represented in Senate and Assembly, do enact as follows:
Section 1. Section 375 of the vehicle and traffic law is amended by adding a new subdivision 10-f to read as follows:
10-f. Twenty-four months from the effective date of this subdivision, every truck, tractor, and tractor-trailer or semitrailer combination registered in this state having a gross vehicle weight rating of twenty-six thousand pounds or more, and a conventional cab configuration in which more than half of the engine length is forward of the foremost point of the windshield base and the steering wheel hub is in the forward quarter of the vehicle length, whenever operated within a city having a population of one million or more on highways other than controlled-access highways, shall be equipped with side under-ride guards affixed to the sides of such vehicles in a manner consistent with rules and regulations that shall be promulgated by the commissioner, in consultation with the commissioner of transportation. For the purposes of this section, "side under-ride guard" shall mean a device fit to the side of a large vehicle designed to prevent pedestrians and bicyclists from falling into the exposed space between the front axle and the rear axle of such vehicles and to prevent passenger vehicles from sliding under such vehicles. The provisions of this subdivision do not apply to trucks, tractors, and tractor-trailer or semitrailer combinations in the state fleet or city fleet or in any city contracted vehicle, as defined by section 6-141 of the administrative code of the city of New York. The commissioner shall be authorized to promulgate any rules necessary to inspect side under-ride guards and side under-ride guard specifications for compliance with the requirements of this subdivision.
§ 2. Section 375 of the vehicle and traffic law is amended by adding a new subdivision 55 to read as follows:
EXPLANATION--Matter in italics (underscored) is new; matter in brackets
[ ] is old law to be omitted.
LBD13625-04-3
55. (a) For the purposes of this subdivision, "side under-ride guard" shall mean a device fit to the side of a large vehicle designed to prevent pedestrians and bicyclists from falling into the exposed space between the front axle and the rear axle of such vehicles and to prevent passenger vehicles from sliding under such vehicles.
(b) Twenty-four months from the effective date of this subdivision, all vehicles with a manufacturer's gross vehicle weight rating exceeding ten thousand pounds in the state fleet shall be equipped with side under-ride guards affixed to the sides of such vehicles in a manner consistent with rules and regulations that shall be promulgated by the commissioner, in consultation with the commissioner of transportation. The commissioner shall have the authority to promulgate any rules necessary to administer the provisions of this subdivision, including but not limited to rules governing when the installation of side under-ride guards on certain vehicles in the state fleet is impractical or will disrupt provision of public safety or public health services and will not be required. Such rules may also govern when written exemptions may be authorized, including due to limitations in vendor capacity to supply side under-ride guards and circumstances in which state-owned vehicles are in the order cycle for replacement. The commissioner shall be authorized to promulgate any rules necessary to inspect side under-ride guards and side under-ride guard specifications for compliance with the requirements of this subdivision.
§ 3. This act shall take effect on the one hundred eightieth day after it shall have become a law. Effective immediately, the addition, amendment and/or repeal of any rule or regulation necessary for the implementation of this act on its effective date are authorized to be made and completed on or before such effective date.
Reflowed for reading: line numbers and page breaks removed. Cite the official text.
Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.