Skip to content
S7979Senate2023-2024 SessionSame asA9799

Require Truck Safety Guards

Official title

“Sets certain requirements for side under-ride guards”

Sponsor Andrew GounardesSD-26Affects Transportation
Status
In Senate Committee
Transportation
Impact
7/10
Significant
Passage
0%

Bill progress

Step 2 of 7

In committee · Transportation

What's happening

This bill requires most large trucks operating in New York City and state vehicles to be equipped with side under-ride guards to protect pedestrians, bicyclists, and passenger vehicles.

Why it matters

  1. Significantly expands safety requirements for trucks. By mandating side under-ride guards for most trucks over 26,000 pounds operating in New York City, this bill targets a major cause of fatal injuries for pedestrians, cyclists, and drivers, aiming to reduce the severity and frequency of such incidents.

  2. Government fleets also included, with flexibility. State-owned vehicles over 10,000 pounds must also install side under-ride guards, but the bill allows for exemptions where installation is impractical, would disrupt public safety/health services, or if there are supply constraints—balancing safety improvements with operational realities.

  3. Promotes regulatory standards and oversight. The bill authorizes the state’s transportation commissioner to set technical standards, inspection protocols, and exemption criteria for side under-ride guards, ensuring that implementation is both effective and adaptable as technology and operational needs evolve.

  4. Sets a clear timeline for compliance. With a two-year window before the requirements take effect, the law gives trucking companies and government agencies time to source, install, and certify side under-ride guards—making it more feasible for fleets to comply without major service disruptions.

The daily · weekday mornings

Albany, before your first meeting.

Every bill that moved yesterday, summarized in a sentence and ranked by impact. The Albany Scorecard follows on Sundays.

Free. Unsubscribe in one click. Want alerts on specific bills? Create an account.

Headline styles

Require Truck Safety Guards

Plain English, a few words. Used as the page title.

Sponsors

Primary sponsor
Andrew Gounardes

Senator · Senate District 26

Chair, Budget And Revenue

No co-sponsors yet.

History

  1. Referred to transportation

Companion bill

The same bill in the other chamber. A bill becomes law when one version passes both houses and the governor signs it, so either number can carry it.

A9799Assembly

Require Truck Side Guards

In Assembly Committee · Transportation · Sponsor Emily Gallagher

Impact 7 · Significant0% to pass

Full text

2 pagesUnderlined is new[Struck] is removedOfficial text on nysenate.gov ↗

STATE OF NEW YORK

7979

IN SENATE

January 4, 2024

Introduced by Sen. GOUNARDES -- read twice and ordered printed, and when printed to be committed to the Committee on Transportation

AN ACT to amend the vehicle and traffic law, in relation to certain requirements for side under-ride guards

The People of the State of New York, represented in Senate and Assembly, do enact as follows:

Section 1. Section 375 of the vehicle and traffic law is amended by adding a new subdivision 10-f to read as follows:

10-f. Twenty-four months from the effective date of this subdivision, every truck, tractor, and tractor-trailer or semitrailer combination registered in this state having a gross vehicle weight rating of twenty-six thousand pounds or more, and a conventional cab configuration in which more than half of the engine length is forward of the foremost point of the windshield base and the steering wheel hub is in the forward quarter of the vehicle length, whenever operated within a city having a population of one million or more on highways other than controlled-access highways, shall be equipped with side under-ride guards affixed to the sides of such vehicles in a manner consistent with rules and regulations that shall be promulgated by the commissioner, in consultation with the commissioner of transportation. For the purposes of this section, "side under-ride guard" shall mean a device fit to the side of a large vehicle designed to prevent pedestrians and bicyclists from falling into the exposed space between the front axle and the rear axle of such vehicles and to prevent passenger vehicles from sliding under such vehicles. The provisions of this subdivision do not apply to trucks, tractors, and tractor-trailer or semitrailer combinations in the state fleet or city fleet or in any city contracted vehicle, as defined by section 6-141 of the administrative code of the city of New York. The commissioner shall be authorized to promulgate any rules necessary to inspect side under-ride guards and side under-ride guard specifications for compliance with the requirements of this subdivision.

§ 2. Section 375 of the vehicle and traffic law is amended by adding a new subdivision 55 to read as follows:

EXPLANATION--Matter in italics (underscored) is new; matter in brackets

[ ] is old law to be omitted.

LBD13625-04-3

55. (a) For the purposes of this subdivision, "side under-ride guard" shall mean a device fit to the side of a large vehicle designed to prevent pedestrians and bicyclists from falling into the exposed space between the front axle and the rear axle of such vehicles and to prevent passenger vehicles from sliding under such vehicles.

(b) Twenty-four months from the effective date of this subdivision, all vehicles with a manufacturer's gross vehicle weight rating exceeding ten thousand pounds in the state fleet shall be equipped with side under-ride guards affixed to the sides of such vehicles in a manner consistent with rules and regulations that shall be promulgated by the commissioner, in consultation with the commissioner of transportation. The commissioner shall have the authority to promulgate any rules necessary to administer the provisions of this subdivision, including but not limited to rules governing when the installation of side under-ride guards on certain vehicles in the state fleet is impractical or will disrupt provision of public safety or public health services and will not be required. Such rules may also govern when written exemptions may be authorized, including due to limitations in vendor capacity to supply side under-ride guards and circumstances in which state-owned vehicles are in the order cycle for replacement. The commissioner shall be authorized to promulgate any rules necessary to inspect side under-ride guards and side under-ride guard specifications for compliance with the requirements of this subdivision.

§ 3. This act shall take effect on the one hundred eightieth day after it shall have become a law. Effective immediately, the addition, amendment and/or repeal of any rule or regulation necessary for the implementation of this act on its effective date are authorized to be made and completed on or before such effective date.

Reflowed for reading: line numbers and page breaks removed. Cite the official text.

Sponsor's memo

Title of bill

An act to amend the vehicle and traffic law, in relation to certain requirements for side under-ride guards

Purpose or general idea of bill

To require that trucks in the state fleet have side under-ride guards installed and to require that large commercial trucks have side under- ride guards installed when driving in New York City.

Summary of provisions

Section 1 amends Section 375 of vehicle and traffic law by adding a new subdivision 10-f which requires vehicles weighing 26,000 pounds or more to have side under-ride guards installed when driving in cities with a population of one million people or more within 24 months of the effec- tive date.

Section 2 amends Section 375 of vehicle and traffic law by adding a new subdivision 55 which requires vehicles weighing 10,000 pounds or more in the state fleet to have side under-ride guards installed within 24 months of the effective date. This new subdivision also provides the commissioner with the authority to grant exemptions to this requirement and promulgate rules related to side guard specifications and inspections.

Justification

Side under-ride guards are a simple, cost effective safety measure to protect pedestrians, cyclists, and passenger vehicle occupants in colli- sions with the side of a large truck. Researchers at the Federal Depart- ment of Transportation found that side under-ride guards have the poten- tial to save the lives of 52 cyclists and pedestrians each year. The UK, which has had a national side guard requirement since the 1980s, experi- enced a 61 percent decrease in fatalities in cyclist collisions with the side of a truck and a 20 percent decrease in fatalities in pedestrian collisions with the side of a truck, according to a joint report by Volpe and the NYC DCAS. An examination of crashes between passenger vehicles and the side of a truck in the Large Truck Crash Causation Study (LTCCS) found that side under-ride guards would have reduced the severity of three quarters of crashes in the study that resulted in serious injuries or fatalities.

While federal standards and requirements exist for rear under-ride guards, the NHTSA has been unwilling to extend these requirements to the sides of large trucks. Cities and states have stepped in, recognizing the need for side under-ride guards to protect communities. Boston, Washington D.C., and New York City have all implemented side guard requirements on their municipal fleets. NYC passed this local law in 2021, and thus far, there has been strong compliance across the city fleet. This legislation utilizes a similar timeline and similar side guard specifications for the state fleet, building upon the strong, well-implemented program in NYC and following in the footsteps of Massa- chusetts, which recently implemented a side guard mandate for its state fleet. Additionally, this legislation requires side guards for vehicles weighing 26,000 pounds or more that drive through NYC, modeled off convex mirror requirements established in 2011 for these same vehicles.

By requiring side guards in the state fleet and in large vehicles in NYC, this bill will expand a critical, life-saving safety feature to thousands of trucks and semi-trailers and prevent deadly collisions across New York.

Prior legislative history

New Bill

Fiscal implications

TBD

Effective date

This act will take effect 180 days after it becomes law.

Summaries, headlines and scores are AI-generated from the official bill text. How we score bills. Source: NYS Open Legislation.